Replacement Roof Vent Cover for 2006 Featherlite Horse Trailer 5th Wheel

Question

Question:

My roof vent cover over the sleeping area just blew off of my 2006 Featherlite and I am wondering if the Maxxair Vent cover MA00-955003 would be a good replacement. There is no fan and the dimension from the inside is roughly 25”x18”. Please help. I need to fix this ASAP. Thanks.

asked by: Laura

0

Expert Reply:

The correct roof vent is going to be determined by the opening/vent on the topside of your Featherlite, opposed to the inside opening. You will need to get up there and measure to make sure you get the correct replacement.

The MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955003 will fit over most standard 14"x14" vents. The Overall dimensions are 25" long x 18-1/8" wide x 10-1/4" tall.

The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # DMC38FR will fit openings of 14-1/4" x 14-1/4" at the roof opening if you happen to have that size. The overall demensions are 23" long x 19-1/2" wide x 10-1/4" tall.

expert reply by: Scott S

0

Answer 1

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 2

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 3

Hey Jesse, cool name! That's definitely a custom project, and there isn't a single off-the-shelf kit that'll give you everything you need. For a lift-up wall that's around 10' x 6', you're looking at building the door and…

view full answer...

Answer 4

Hey Doug, for your Ventadome V3094 the vent cover you would want would be the MaxxAir part #MA00-933069 which is a universal style vent cover. We don't have anything that is custom fit for the Ventadome at this time.

view full answer...

Answer 5

I spoke with my contact at MaxxAir regarding the MaxxAir 2 Vent Covers like the Smoke #MA00-933073 that you were looking at and the Standard Covers like #MA00-933067. He said there are two primary differences between the two models. The first is that…

view full answer...

Answer 6

Hey Jason, thanks for reaching out. Yes, the etrailer Electric Trailer Jack #e55ZV is a great fit for your 2022 Cruiser MPG. Your trailer uses a standard A-frame tongue, and the #e55ZV is designed to mount directly in place of the factory jack, so…

view full answer...

Answer 7

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 8

Hi Rick, Yes, you can replace just the top half of your B&W Companion 25K hitch with part #BWRVC3006, so you don’t have to replace the entire setup. The replacement head assembly is designed to work with your existing base. From what you…

view full answer...

Answer 9

Good morning Tony, since the MaxxAir rv roof vent with fan and white lid #MA96WV (also available with smoked lid #MA36WV) is a manual lift model, you would need to close the lid during rain unless you add a vent cover. And you would not need to go…

view full answer...

Answer 10

Hello Kevin, that’s a great comparison to make. The Deluxe models like #MA00-07500K are higher output - they move up to around 900 CFM and include powered lift, rain sensing, a built-in thermostat, and more speed settings. They’re designed for…

view full answer...

Replacement Roof Vent Cover for 2006 Featherlite Horse Trailer 5th Wheel

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching