Replacement Head For B&W 25k Hitch for 2022 Ford F450

Question

Question:

I have the BandW 25K 5th wheel hitch for my 2022 F450. Had this for three years but recently the top part of the hitch got bent and a weld torn. Not sure how but guessing it was from backing into a slightly unlevel camp site. It an not be fixed as I had a welding shop look at it. Is it possible to just purchase the top half of the hitch? The base is perfectly fine.

asked by: Rick R

0

Expert Reply:

Hi Rick,

Yes, you can replace just the top half of your B&W Companion 25K hitch with part # BWRVC3006, so you don’t have to replace the entire setup. The replacement head assembly is designed to work with your existing base.

From what you described with the bent head and torn weld, you’re absolutely doing the right thing by replacing it instead of trying to repair it. That top portion carries all the load from the king pin, so once it’s compromised, it’s not something you want to risk.

The new head will drop right onto your current base and reuse your pivot arms and pins, so as long as your base is still in good shape, you’ll be good to go. One thing I would just double check is which version of the Companion you have, whether it’s the OEM puck system or the turnover ball style, just to make sure everything lines up correctly.

Do you happen to know which version you’re running on your F450?

expert reply by: Heather A

0

Dale

4/6/2026

Hi Rick. I had to replace the head of my hitch because it was stolen in Albuquerque. The replacement head fits the base perfectly. Works great.

Heather A.

4/7/2026

@Dale Geez.. people are just going around stealing fifth wheel heads? I had no idea that was even a thing. I am glad to hear the new head works well for you. Where do you like to travel?

Bert

4/6/2026

I already have the head and needed to change the base to fit my new GMC old one was a dodge. There interchangeable and fits like new

Heather A.

4/7/2026

@Bert Love to hear this Bert! Where do you like to take the GMC and your fifth wheel?

Tim

4/6/2026

You might try contacting B&W about the hitch failure. There is a chance they would replace it and get yours back to research why it failed. Otherwise the replacement head is a direct fit

Heather A.

4/7/2026

@Tim I second that Tim! Great point, B&W stands behind their products and these hitches do carry a warranty, and they’re known for having really solid customer service. So it’s absolutely worth reaching out to them before purchasing anything.

Patrick

4/6/2026

Hi Rick, Yes you can. I recently bought a new top due to a camper fell on my hitch. Bent the top part but the bottom was fine. The new one fits perfectly. Happy towing, and safe travels

Tom

4/6/2026

I purchased the replacement head for my companion slider. Double checked model numbers when I ordered and it was a smooth install on the replacement.

Allan

4/7/2026

Hello Rick, I had to replace the head assembly. It changed out easy and quickly. My issue was basically my fault. I purchased a used fifth wheel camper with I think was called an easy slide hitch on camper. For my set up I was supposed to remove a plate on camper which I did not know and hooked up and started to move. When I made a turn the plate had a welded piece of metal which broke the head. Hope that helps as that was my situation Regards Allan

Heather A.

4/7/2026

@Allan I really appreciate you sharing that, that’s super helpful context. It’s one of those things that’s easy to miss, especially with a used setup, and it makes sense how that could put unexpected stress on the head. Glad to hear the replacement went smoothly for you once everything was sorted out.

Show All (6) Replies

Hide Replies

Answer 1

Hey, Rob. That's a really good question. I did a lot of comparing between the instructions and how the cover and canister would attach the it's identical. You should have no issues replacing your old rails with the ones with the t-slots. I…

view full answer...

Answer 2

Yes, you would need to replace both the head and the base. The Replacement Head Assembly for B&W Companion 5th Wheel Trailer Hitches #BWRVC3006 fits the B&W Companion base. The 18k from B&W is the Patriot not a Companion, therefore the…

view full answer...

Answer 3

Hello Tim, thanks for reaching out. It is possible to upgrade the capacity of your B&W Companion hitch. You would just need to get a new base for your hitch. The head unit part #BWRVC3006 is the same on both the 20K and 25K versions of the…

view full answer...

Answer 4

No, the correct replacement t-slot rails for your RetraxPRO MX Hard Tonneau Cover #RTX77FR can be found with part #RTX39FR.

view full answer...

Answer 5

Hey Jon, you are correct and Retrax is who makes the OEM tonneau cover on your 2024 Ford F-450 long bed. We do carry a replacement set of side rails for your cover with the part #RTX66QR. This for both the left and right sides. We do not have ability…

view full answer...

Answer 6

Hey Derek! The cover you have on your 2024 Ford F-150 Raptor is the 80378. To add the T-slot rails you need the Replacement Side Rails for Retrax XR Series Hard Tonneau Covers #RTT-82381. This will convert it from the MX to the XR. If you need…

view full answer...

Answer 7

Yes, you can replace the side rails on a RetraxONE MX Hard Tonneau Cover with the RetraxONE XR Hard Tonneau Cover Rails to gain the t-slots. For a 2016 Ram 2500 6-1/2' bed you'll need the Replacement Side Rails for Retrax XR Series Hard…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Head For B&W 25k Hitch for 2022 Ford F450

Product Page this Question was Asked From

Continue Researching