Will Dexter Axle Beam 7359765 Replace Bent 95" Hub Face To Hub Face Dexter Axle?
Published 09/14/2021
Products Featured in This Question
Question:
I have a Dexter axle assembly with electric brakes. The number on the sticker on the tube is AX359580B-X It is 95inch hub face and 80inch spring center axle. axle sits on top of springs My brake components are fine and i can transfer them to a new beam. Is this the beam I need to replace my bent one?
asked by: Brad F
Expert Reply:
It sure is!
The Dexter Trailer Axle Beam # 7359765 you were looking at has the same 95" hub face to hub face and 80" spring center to spring center measurement as your current axle so this will be an exact replacement for you. The spring seats on this axle are located on the bottom so it will sit above your leaf springs just like your old axle.
Since you mentioned you brake components are in good shape they can be transferred over as this axle uses the same bearing combination of # L68149 and # L44649.
It is a good idea however to go ahead and replace the U-bolts and U-bolt plates with the # CE23002 to make sure your axle is securely connected to your leaf springs as that is the only thing securing the axle to the trailer.
I included videos of the recommended products for you to take a look at.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Search Results: dexter axle 3500
- Video: Measuring To Choose The Right Trailer Axle
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Search Results: over under
- Search Results: wheel
- Search Results: trailer bump stop
- Search Results: trailer wheel
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: Dexstar Steel Spoke Trailer Wheel Spec Review
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Maintenance Schedule
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: Timbren Trailer Suspension Enhancement System for Spring Over Axle Configurations - 5,000 lbs
- Shop: Dexstar Steel Spoke Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - Silver Powder Coat
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Underslung
- Q&A: Availability of Steel Spoke Trailer Wheel 15 by 5 inch with 5 on 4-1/2 inch Bolt Pattern
- Q&A: What Does the 5 and the J Indicate on a 15x5J Trailer Wheel and ST205/75D15
- Q&A: 95" Long Axle With 80" Spring Center With Electric Trailer Brakes and a 5 on 4-3/4" Bolt Pattern
- Q&A: Recommended Trailer Bump Stop and Suspension Enhancement for Tandem Axle Trailer
- Q&A: Should Bump Stops be Added to a Trailer when Using and Over/Under Conversion Kit
- Q&A: Will Nose-High 5th Wheel Trailer Sway During Travel
- Q&A: How to Lift a 2020 Montana High County 5th Wheel Trailer
- Video: Complete Breakdown of the Dexter Trailer Axle Beam with E-Z Lube Spindles