Class IV Receiver Hitch for 2019 Dodge Ram 1500

Question

Question:

I just purchased a 2019 4x4 Ram Big Horn. I would like a class IV trailor hitch. Do you have one compatible with my truck?

asked by: Carla E

0

Expert Reply:

There are two Class IV trailer hitches that fit your 2019 Ram 1500 the Curt Trailer Hitch Receiver item # 14374 and Draw-Tite Trailer Hitch Receiver item # 75232.

Both of these trailer hitches have a 2" receiver, 10,000 lb maximum towing capacity and 1,000 lb maximum tongue weight capacity. They are bolt-on installations so you will not have to drill to install either on your truck. I have added a link to installs of both hitches on a '19 Ram 1500 Classic for you.

expert reply by: Jerred H

0

Answer 1

You are right that the minimum recommended ground clearance is 11". Using the #BWTS20049B in its lowest position would leave one of the trailer balls lower than the vertical portion of the ball mount. There really is no work around in this case.…

view full answer...

Answer 2

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

view full answer...

Answer 3

The Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel #AM30859 will fit your Harbor Freight trailer as long as it uses the same 5 on 4-1/2" bolt pattern. The larger pilot hole diameter is not a problem since the wheels are lug centric…

view full answer...

Answer 4

We don't have a confirmed fit for your Fulton Coupler for a repair kit. The Latch Repair Kit #F670801 is the closest option we have and hasn't been tested with straight couplers so I can't confirm it will work. I recommend instead for a…

view full answer...

Answer 5

The etrailer.com Trailer Hitch Receiver #E98852 is only a fit for 2019 Ram 1500 Classics that do not have a factory hitch. If you do not have a 1500 Classic and instead have the new style of 2019 Ram 1500 then the trailer hitch that will fit is the…

view full answer...

Answer 6

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75662 is only a fit for the 2019 Ram 1500 Classic without a factory trailer hitch which is the old body style (fourth generation). The photo you attached shows a factory trailer hitch on what I…

view full answer...

Answer 7

Hello Jeff, thanks for reaching out. I double checked the Draw-Tite website and it looks like their listing is the same as ours. The #41948 hitch will only fit the 2024 Ram 1500 Classic. If your Ram is the Laramie and not the Classic model, you will…

view full answer...

Answer 8

We do have a trailer hitch that fits your 2020 Ram 1500 that has a much higher towing capacity with the Curt item #C15005 which has the towing capacity of 17,000 lbs. This is a frame mounted design that's much more heavy duty overall. It still is…

view full answer...

Answer 9

For the New Body Style of the 2019 Ram 1500, I recommend the Curt #C15005 which will fit whether you have the factory hitch or the Class III tow bumper. This is a strong Class V trailer hitch which exceeds the max towing rating of your Ram 1500. Even…

view full answer...

Answer 10

With your tongue weight at 1,175 lbs when loaded, you also need to account for any cargo weight behind the rear axle as well to get the total tongue weight rating. I've attached an article to assist. You are correct that your current system is…

view full answer...

Class IV Receiver Hitch for 2019 Dodge Ram 1500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching