Will Dexter EZ Flex Kit Fit 2014 Nash 23D Trailer with 31 inch Axle Spacing

Question

Question:

2014 Nash 23D travel trailer. Measured axle at 31.

asked by: PATRICIA E

0

Expert Reply:

Yes you can use the Dexter EZ-Flex cushioned equalizer part # K71-652-00 on your 2014 Nash 23D trailer that has a 31 inch axle spacing.

expert reply by: Jameson C

0

Answer 1

You got the wrong size. With your axle spacing of 33", the correct size would be the Dexter E-Z Flex Suspension Kit #K71-652-00 (6,000 lbs.). The Dexter E-Z Flex Suspension Kit #K71-653-00 (8,000 lbs.) you purchased would be if your axle spacing…

view full answer...

Answer 2

The E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle part #K71-652-00 is designed to fit trailers that have a double-eye leaf spring setup, tandem axles that are 33" apart, and axle capacities up to 6,000 lbs. Unfortunately, we do not…

view full answer...

Answer 3

Hanger height and spacing, spring length, shackle length and equalizer size are all variables in a trailer suspension and it is possible that the same length springs can fit in more than one application. The dimensions on the included charts are just…

view full answer...

Answer 4

In the past we've found that the trailers that have 31 inch wheelbases use the equalizer #TREQ104 so based on that the correct kit you'd need would be the part #AP233.

view full answer...

Answer 5

I just spoke with my rep at MORryde and she said that you are able to use the CRE3000 MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K item #MR87ZR on a tandam axle trailer with 31 inch spacing if your are using 24 inch…

view full answer...

Answer 6

The MORryde ALLTREK 4000 part #MR89DR should fit but you'd need to measure your equalizers first to be sure since your wheelbase is not one of the more common ones. If your equalizer has a distance of 6-1/2 inches between the bolt centers (or…

view full answer...

Answer 7

Hey Mike, To determine if the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR would be a compatible fit you'll first want to measure the bolt hole spacing on your current equalizers. The #MR87ZR has a 6-1/2" center to center…

view full answer...

Answer 8

Finding the correct MORryde equalizer kit will be pretty specific, so I cannot tell you which will be correct without knowing the wheel spacing and axle capacity, unfortunately. With that being said, if you have the trailer's VIN, you may be able…

view full answer...

Answer 9

We have checked with MORryde for your exact scenario and they said that you are able to use the CRE3000 MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K item #MR87ZR on a tandem axle trailer with 31 inch spacing if your…

view full answer...

Answer 10

Stabilizer jacks are not designed to carry the full weight of trailer so I can not recommend using them as a way to hold the trailer when you work on it. Having it connected to your truck would be the way to go.

view full answer...

Answer 11

Hey Nathan, the Dexter E-Z Flex Suspension Kit #K71-652-00 that you referenced will work for you and won't drastically change the ride height of your trailer. The equalizers are 2 inches shorter but the shackle straps being right at 1 inch…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Will Dexter EZ Flex Kit Fit 2014 Nash 23D Trailer with 31 inch Axle Spacing

Product Page this Question was Asked From

Continue Researching