Dolly for Trailer 7,500 lb Trailer With 2-5/16" Ball

Question

Question:

I have a 24rbs travel trailer. Gvw of about 7500. Which power dolly would be best. It has a 2-5/16 ball. But I also have a flat trailer that uses a 1-7/16ç ball.

asked by: Duane D

0

Expert Reply:

Hi Duane; the Trailer Valet MV PRO Trailer Dolly w/ Chain Drive # TV96FR you looked at is the best option here. However, this does not include a 1-7/8" ball so you will need to pick up # TV67FR separately. It comes with the drill attachment so it can be powered or you can use the manual handle as well.

Where are you headed next with your travel trailer?

expert reply by: Robin H

0

Trailer Valet MV PRO
(click to enlarge)

Answer 1

Hanger height and spacing, spring length, shackle length and equalizer size are all variables in a trailer suspension and it is possible that the same length springs can fit in more than one application. The dimensions on the included charts are just…

view full answer...

Answer 2

The E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle part #K71-652-00 is designed to fit trailers that have a double-eye leaf spring setup, tandem axles that are 33" apart, and axle capacities up to 6,000 lbs. Unfortunately, we do not…

view full answer...

Answer 3

Yes you can use the Dexter EZ-Flex cushioned equalizer part #K71-652-00 on your 2014 Nash 23D trailer that has a 31 inch axle spacing.

view full answer...

Answer 4

You got the wrong size. With your axle spacing of 33", the correct size would be the Dexter E-Z Flex Suspension Kit #K71-652-00 (6,000 lbs.). The Dexter E-Z Flex Suspension Kit #K71-653-00 (8,000 lbs.) you purchased would be if your axle spacing…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 10

Hey Victor, yes the Long U-Bolt Kit part #RM33KT is a Roadmaster brand u-bolt kit. This does include nuts and washers as well.

view full answer...

Answer 11

Hey Chris, congrats on the new trailer! I've got two trailer dolly options that are going to work great with your 8,800 lbs 2026 Airstream Classic 28. One is a manual and the other is electric. Manual - Trailer Valet XL Trailer Dolly with Chain…

view full answer...

Answer 12

That's a really good question, Dan! For this type of set up you would need to attach the Parkit360 Transformer, part #PA66VR, stabilizer bars to the kingpin box instead. I've gone ahead and included attachments that show step by step how to…

view full answer...

Dolly for Trailer 7,500 lb Trailer With 2-5/16" Ball

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching