Search: morryde suspension kits   >  

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

Hey Beatrice, To find the right fit for your trailer's suspension you'll need to take a quick measurement of your current shackle straps. You'll need to measure from the center of one bolt hole to the center of the other bolt hole. The…

Hey Dave, the MORryde upgraded shackle kit part #MR76ZR that you referenced is compatible with your 2020 Grand Design 2670MK and the Lippert Road Armor equalizers.

There is no functional difference between the older gold and the current red versions of the Dexter EZ Flex Equalizers part #K71-652-00. They just decided to powder coat them red recently.

So starting with the question about weight, since you have 5,200 lb axles, go with the 5,300 lb leaf springs, or even 6,000 lb leaf springs would be okay, but I do not recommend going with springs rated less than the axle capacity. The number of…

To ensure that the Dexter E-Z Flex Suspension Kit #K71-653-00 is the correct kit for your 2022 Grand Design Imagine XLS 22MLE you will want to verify the hole center measurement on your current equalizer. This particular Dexter unit is designed to…

It looks like your MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR are longer than your previous equalizers were because your leaf springs are way too close to each other. The shackles should be creating more of a "W" shape instead…

The Hydrastar #HS381-8067 is a vented version of the actuator designed for marine applications (boat trailers) whereas the part #HBA16 was not designed for marine applications.

According to MORryde the AllTrek 4000 #MR29DR does not have a minimum weight requirement. However, smaller axles typically aren't compatible since there are other requirements like wheel size. The equalizers require a minimum rim size of 15"…

I was able to confirm that your Montana 3710FL uses tandem 7000 lb axles. A 7K axle would typically have an 8 on 6-1/2 wheel bolt pattern and the spindles would be compatible with a 25580 inner and an 14125A outer bearing. You'll want to identify…

We do have 7k rated disc brake kits from Titan as part #THRCM13378DACEK. Since you have a tandem axle trailer you'd need two kits.

From talking with previous customers who have the same trailer as you we were able to determine that your trailer has 7k Dexter axles. So for a Titan disc brake kit you would want the part #THRCM13378DACEK. This is a 7k rated disc brake system that…