How To Tell Which MORryde Equalizers Will Fit A 2012 Jayco 26BH

Published 10/28/2021

Question:

Looking to see if youre able to tell me which morryde cre3000 would fit my Jayco 26BH. I dont have it available to measure and would like to get the parts ordered. Thanks

asked by: David Y

Expert Reply:

Finding the correct MORryde equalizer kit will be pretty specific, so I cannot tell you which will be correct without knowing the wheel spacing and axle capacity, unfortunately.

With that being said, if you have the trailer's VIN, you may be able to obtain this info from Jayco. The axle capacity will definitely be something they keep on file, but I cannot say with 100% surety they can tell you the wheel spacing. If they can get you both of these, let me know and I can definitely get you set up with the correct parts.

If they cannot, alas, you will need to either see if someone near the trailer can measure the wheel spacing, or you will need to wait to order the parts after you can measure it. Also, if you need to go one of these routes, the wheel base can be measured from the center of the front wheel to the center of the rear wheel, but it is also advisable to measure from the center of the front hanger to the center of the rear hanger. The wheel measurements can vary a little bit, but the frame hanger spread (FHS) measurement is always exact when looking at these.

expert reply by: Lazer S