Does the Roadmaster Comfort Ride Shock Absorbers Increase Ride Height?

Question

Question:

Does the slipper spring and shock kit raise the ride height of the trailer? Have a 2019 Palomino Puma 32BHDB.

asked by: Darin

0

Expert Reply:

The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers item # RM-2460 is not designed to raise your 2019 Palomino Puma 32BHDB trailer but you may see a slight height increase because there won't be as much strain on the springs. If you are looking to raise the height on your trailer send me an email and I will be glad to help you out.

expert reply by: Jerred H

0

Answer 1

As long as your wheel doesn't have a specific weight rating listed you can just upgrade your valve stem to a metal one like the Americana Metal, Bolt-In Valve Stem #AM20906 and it will hold up just fine, yes. Most wheels can handle the weight…

view full answer...

Answer 2

Actually in 2020 Roadmaster changed the width of their slipper springs that come with the Roadmaster Comfort Ride Systems #RM-2460-2570-3 from 2 inch 1-3/4 inch.

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 10

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Does the Roadmaster Comfort Ride Shock Absorbers Increase Ride Height?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching