Can a Rear Hanger that is Wider than the Trailer Frame be Still be Used
Updated 05/15/2013 | Published 05/14/2013
Question:
My trailer is constructed of 1.5inch X 3inch C-channel steel. The bottom surface is only 1.5inch wide, but the hanger is wider than the frame surface. What are my options to get this welded securely to the frame, or is there a different hanger that will work?
asked by: Anthony
Expert Reply:
The reason that the hanger is wider is most likely because double-eye springs are 1-3/4 inches wide. But as long as the hangers you are using are welded to the bottom of the frame as much as they possibly can be it will be fine. Welding should be performed by a qualified professional welder.
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- Redline
more information >
Continue Researching
- Shop: CE Smith Carpeted Johnboat Bunk Board for Boat Trailers - 2' Long - Qty 1
- Video: An In-Depth Look at the CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs
- Q&A: Replacement Axle Options For a Dexter 2,000LB Axle With 45" Hub Face and 26" Spring Center
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Shop: CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Aluminum Wheel - 5 on 4-1/2 - Load Range C
- Video: An In-Depth Look at the CE Smith Carpeted Johnboat Bunk Board for Boat Trailers
- Q&A: Bolt Size Recommended For Channel Style Tongue Trailer Coupler Installation
- Search Results: boat trailer fenders
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range D
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E
- Video: BoatBuckle Boat Winch Strap with Latch-Lok Hook Spec Review
- Search Results: bow stop bracket
- Q&A: Folding Hinge for 2 x 2 Inch Trailer Tongue
- Search Results: boat winch post
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer hitch
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer wiring
- Shop: Brake Controller
on Trailer Suspension Parts
