Does Curt Trailer Hitch Receiver Fit 2020 Chevy Sonic RS

Question

Question:

Will it fit a 2020 Chev sonic with a RS trim

asked by: Joseph A

0

Expert Reply:

Yes, the Curt trailer hitch receiver will indeed fit your 2020 Chevy Sonic with the RS package! The only thing to note is that there are two different fits, depending on if your Sonic is a hatchback or sedan:

- Hatchback: Curt Trailer Hitch Receiver # C11464

- Sedan: Curt Trailer Hitch Receiver # C11240

Both will fit the RS package without issue so you're all set!

expert reply by: Kyle S

0

Answer 1

I spoke to my contact at Draw-Tite and he confirmed for me that the Draw-Tite Trailer Hitch #24878 will work on the 2013 Chevy Sonic RS. He said the lower fascia may be different on the RS models but that it did not hang down any further than the…

view full answer...

Answer 2

Howdy to you, too! Installing a trailer hitch on your 2013 Chevy Sonic Hatchback does not require a lift. But there isn't much space between the ground and the vehicle so you would benefit from using a jack and jack stands. It will make the…

view full answer...

Answer 3

All of the trailer hitches available for the 2013 Chevrolet Sonic are Class I trailer hitches. Most Class I trailer hitch receivers have a tab inside of the receiver to allow only certain accessories to be used with the receiver. This tab is intended…

view full answer...

Answer 4

I checked with Draw-Tite and they do list trailer hitch #24878 as a fit for all models of the 2013 Chevy Sonic hatchback so that would include an RS. I have included a link to the installation instructions for you to view. If you plan on doing some…

view full answer...

Answer 5

In order to transport a motorcycle using your 2013 Chevy Sonic RS it will have to be towed on a trailer. The problem is that the bike is too heavy to carry it on a hitch mounted carrier. They do make small trailers designed for motorcycles so you…

view full answer...

Answer 6

Hey Hannah, thanks for reaching out. Yes, the Curt #C59236 will indeed work on a 2026 Chevy Equinox EV LT1 without the tow package. This is a universal hardwire harness that can be used on most vehicles. There are no custom plug-in harnesses for the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The CIPA door mount towing mirror, #11650, is a universal fit item that is designed to fit as many vehicles as possible so it is very likely it will fit your 1998 Buick Century. I have included a link to a video review that shows how the mirror…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

We can get that hardware for you. You'll need part #RHK. Use the provided link to get to the product page. In the proper field, type in the hitch part number, which is C13379, then from the drop down menu, choose Curt.

view full answer...

Answer 11

Hi Peter; this is a bit of a hot topic right now. If you 100% for sure have the tow package on your 2025 Equinox you should be able to use the #C44FR. However, we have had some people have issues with this on the vehicle side. I'm not sure if…

view full answer...

Does Curt Trailer Hitch Receiver Fit 2020 Chevy Sonic RS

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching