Does the Draw-Tite # 24878 fit a 2013 Chevy Sonic RS

Question

Question:

I have a 2013 Chevrolet Sonic RS and am interested to know if this hitch will fit given that the RS has a lowered suspension and a different rear facia?

asked by: Michael

1

Helpful Expert Reply:

I spoke to my contact at Draw-Tite and he confirmed for me that the Draw-Tite Trailer Hitch # 24878 will work on the 2013 Chevy Sonic RS. He said the lower fascia may be different on the RS models but that it did not hang down any further than the non-RS models so it would not be an issue.

The lowered suspension does not matter either.

expert reply by: Jameson C

1

Answer 1

I checked with Draw-Tite and they do list trailer hitch #24878 as a fit for all models of the 2013 Chevy Sonic hatchback so that would include an RS. I have included a link to the installation instructions for you to view. If you plan on doing some…

view full answer...

Answer 2

All of the trailer hitches available for the 2013 Chevrolet Sonic are Class I trailer hitches. Most Class I trailer hitch receivers have a tab inside of the receiver to allow only certain accessories to be used with the receiver. This tab is intended…

view full answer...

Answer 3

Howdy to you, too! Installing a trailer hitch on your 2013 Chevy Sonic Hatchback does not require a lift. But there isn't much space between the ground and the vehicle so you would benefit from using a jack and jack stands. It will make the…

view full answer...

Answer 4

Yes, the Curt trailer hitch receiver will indeed fit your 2020 Chevy Sonic with the RS package! The only thing to note is that there are two different fits, depending on if your Sonic is a hatchback or sedan: - Hatchback: Curt Trailer Hitch Receiver…

view full answer...

Answer 5

In order to transport a motorcycle using your 2013 Chevy Sonic RS it will have to be towed on a trailer. The problem is that the bike is too heavy to carry it on a hitch mounted carrier. They do make small trailers designed for motorcycles so you…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Does the Draw-Tite # 24878 fit a 2013 Chevy Sonic RS

Continue Researching