How Do You Measure The Height Of An Equalizer?
Published 08/13/2021
Products Featured in This Question
Question:
How do I determine the height of my equalizer. Front and rear spring mounts measure two and a half inches to whole center
asked by: Jeff
Expert Reply:
The height of your equalizer is measured from the center of the horizontal mounting holes, to the center of the upper mounting hole as shown as the 2" measurement in the included diagram of the # TREQ104.
If you can send me this measurement, and if you are wanting a standard or cushioned equalizer I would be happy to recommend the correct replacement for you.
I included a video of the # TREQ104 for you to take a look at.
(click to enlarge)
Product Page this Question was Asked From
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 3-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Detailed Breakdown of the Curved Equalizer for 1-3/4" Wide Double-Eye Spring
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Q&A: Are Trailer Leaf Spring Shackles Supposed to be Angled or Totally Straight
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Q&A: Should Shackle Straps Angle Towards the Axles or Away From Them
- Q&A: Brake Flange that Can Fit to Square Axle that is 1.5 inches by 1.5 inches
- Search Results: weld on spindles
- Q&A: Pros and Cons of Adding Cast or Aluminum Disc Brake Calipers to a Boat Trailer
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Q&A: How to Determine the Capacity of Trailer Leaf Springs and How to Raise the Coupler Height
- Q&A: Bolt Pattern of 5 Bolt Brake Mounting Flange for Trailer Brakes
- Search Results: dacromet trailer leaf springs
- Search Results: boat trailer leaf springs
- Search Results: galvanized equalizer
- Search Results: galvanized shackle
- Search Results: weld on spindle
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Video: Checking Out the Front/Center/Rear Hanger for Double-Eye Springs
- Video: What to Know About the Front/Center/Rear Hanger for Double-Eye Springs
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
- Search Results: leaf spring hanger
- Shop: Replacement Shackle Link with Bolts for Dexter Trailer Suspension Kits
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles - 26" Long - Dacromet
- Q&A: Recommended Lift Kit for a Triple Axle Trailer
- Video: All You Need to Know About the Curved Equalizer for 1-3/4" Wide Double-Eye Springs
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams
- Shop: RV Interior Lighting