Determining Which Wet Bolts Fit Trailer With Tandem Dexter 3000lb Axles
Updated 05/14/2021 | Published 05/13/2021
Products Featured in This Question
Question:
Do you have a wet bolt kit to fit these axles. Also is it necessary for the equalizer to be replaced also. Attached are photos of my axle label.
asked by: Robert W
Expert Reply:
I would be happy to help you find the correct wet bolt kit, but unfortunately that is not something that can be determined by the serial number of the axle.
Instead you will need to measure one of your current bolts. Typically these bolts are 9/16" diameter and are roughly 3-5/16" in length. If that matches the diameter of your current bolts then you can use 14 of the # 126B2 as replacement wet bolts.
You do not need to replace the equalizers unless they are in bad shape.
If you do decide to replace the equalizers, then you will just need to measure the distance center to center of the two horizontal mounting holes.
For example if you have 5-1/2" long equalizers then you can replace them with the Equa-Flex Cushioned Equalizers # LC279687.
If you go this route you can use wet bolt kit # LC64FR.
I included videos of the products mentioned for you to take a look at.
(click to enlarge)
Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Tandem Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Brake Shoes for Dexter 10" Nev-R-Adjust Electric Brake - Right Hand - 3,500 lbs
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Shop: Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs
- Q&A: Replacement Wet Bolt for Trailer Leaf Spring and Shackles
- Q&A: Difference Between etrailer and Timken Bearing Kit
- Video: Dexter Heavy-Duty Suspension Kit Installation - 2018 Grand Design Momentum 5W Toy Hauler
- Search Results: wheel hub cover
- Search Results: axel grease
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Search Results: tmk52vr
- Video: What to Know About the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Shop: BOLT brand vehicle and hitch locks
- Shop: Towing Mirrors
- Search Results: dexter bearings
- Search Results: dexter trailer brakes
- Search Results: dexter brake pads
- Q&A: Dexter Heavy Duty Equalizer Suspension Kit for Trailer with 34 inch Wheelbase
- Q&A: Does Dexter Heavy Duty Suspension Kit # K71-359-00 Fit 2018 Keystone Cougar 26RBS
- Q&A: Installing Dexter Heavy-Duty Suspension Kit # K71-359-00 on Trailer with 34" Axle Spacing
- Q&A: How To Measure For Axle Spacing And Choose The Correct Replacement Suspension Kit
- Q&A: Distance Between Axles When Using Dexter Equalizer Kit # K71-359-00
- Video: What to Know About the Front/Center/Rear Hanger for Double-Eye Springs
- Video: Checking Out the Front/Center/Rear Hanger for Double-Eye Springs
- Search Results: leaf spring hanger
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Hitch
on Trailer Suspension Parts
