Correct Replacement for VD218105A Fan Motor

Question

Question:

I’m replacing vent fan in rv. The ones I’m seeing on internet don’t have the exact numbers as bad motor. Some numbers are same but not all. Here’s what I have. HC335MG VD218105A 3D5223 06 The VD218105A number is the same but the others are different. Do all numbers need be the same? Thanks! Also. Do you sell these?

asked by: Roy

0

Expert Reply:

The correct replacement motor for the VD218105A is the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans part # BVD0218-00. The numbers are not all the same nor do they need to be, the important one is the model number of the motor which is BVD0218-00 and that is the one that will be used for replacement.

expert reply by: Conner L

0

Answer 1

The replacement motor for the Greystone RV Range Hood with Light - 12V - 24" Wide - Black Item #324-000087 is the Replacement 12-Volt DC Fan Motor for Ventline RV Range Hood Item #BVD0218-00. If you also need to replace the fan blade the correct…

view full answer...

Answer 2

The motor you'd looked at, part #BVD0218-00 is the correct replacement for your range hood. I've confirmed this by forwarding your photo to the folks at Ventline.

view full answer...

Answer 3

Thank you for the photo! For your Ventline Range Hood PH CC0431-09 you're either going to need the motor #BVD0218-00 or the motor #BVD0218-00C. The first motor is for an unlisted range hood while the second motor is for a CSA range hood. To…

view full answer...

Answer 4

The correct replacement motor for your Rs-385phc2-17100b Vdo218-00 Kinmore Vent is going to be the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans Item #BVD0218-00.

view full answer...

Answer 5

The CC316-01 number you referred to is the original part number of the fan motor. Is it a replacement fan blade or motor you're needing? If that's the case, you'd use the #BVD0218-00-R replacement motor. If you were needing a replacement…

view full answer...

Answer 6

The correct replacement motor for a Ventline Vent Fan V2094 is the Replacement 12V DC Motor for Ventline, Ventadome part #BVD0218-00.

view full answer...

Answer 7

Yes, the replacement motor you need for your V2094 Vent is the part #BVD0218-00. The replacement fan blade is part #BVD0215-00 as well.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

Hey Tom, great question! Both products provide an easy way to measure tongue weight, but they excel in different situations. The BTBRV Trailer Jack Foot Scale #BTBRV014 measures tongue weight at the trailer jack, so you don't need to position a…

view full answer...

Answer 12

Hello David. I can certainly point you in the right direction. When selecting a lift kit, we need to consider the axle type and the weight capacity of each axle. For example the Torflex Lift Kit #K71-707-02 that you were looking at will work with #10…

view full answer...

Correct Replacement for VD218105A Fan Motor

Product Page this Question was Asked From

Continue Researching