Can 14' Solera Rollbar LC422429-14FT Be Cut Down To 13'?

Question

Question:

I was wondering if I could cut down this part to fit a 13foot awning since the 13ft awning roll bars are not currently in stock anywhere?

asked by: Chris H

0

Expert Reply:

I reached out to my contact at Lippert and she confirmed that you could indeed purchase a longer awning rollbar like the Solera Rollbar # LC422429-14FT which is 14' long and cut it down to the 13' length you need.

This is how the rollbars are made at the factory, but you will just want to make sure you measure precisely do you do not run into any issues with the rollbar being too short.

expert reply by: Samuel C

0

Answer 1

I can't speak for the rest of the world but all of our rollers like item #LC422429-14FT are 4" wide and only come with the one utility slot and three channels for connecting the fabric. What brand of awning do you have?

view full answer...

Answer 2

As you have a Solera Edge awning on your 2022 Forest River Cherokee you will have to replace the entire awning to be able to use a Solera Screen Room #LC362218 or Solera Family Room #LC362230. The arms you have are specific to the Edge awning so you…

view full answer...

Answer 3

Based on the pictures you definitely need the awning support arm #LC281154. I can't tell in that other photo if the pin is bent or damaged, or just barely hanging in there. I'm also not sure if your idler head and roller endcap are ok or not…

view full answer...

Answer 4

The 21 ft Solera Rollbar #LC338512477 that you referenced comes with just the rollbar, no endcaps or springs or other hardware. The O.D. is 3.50 inches and the I.D. is 3.38 inches. My contact at Lippert Components said that the I.D. doesn't take…

view full answer...

Answer 5

The inner diameter of the Solera Rollbar Only for 15' Black Awning #LC260560333 is 3.38" and has an outer diameter 3.5".

view full answer...

Answer 6

If you're wanting to add on led strip lights to the exterior of your RV then you'll want to choose one that's weatherproof and rated to withstand weather, like the Optronics Flexible LED Light Strip #UCL90CB. These light strips come with…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Can 14' Solera Rollbar LC422429-14FT Be Cut Down To 13'?

Product Page this Question was Asked From

Continue Researching