Front Hitch Options for 2020 GMC Sierra 1500

Question

Question:

Does this Draw Tite hitch fit my 2020 GMC Sierra 1500 are there other options?

asked by: Gilbert C

0

Expert Reply:

The Draw Tite hitch # DT44HR does fit your 2020 GMC Sierra 1500 but we also have the Curt # C31088 available too. The Draw Tite fits more sub models so it would be what I would recommend.

expert reply by: Jameson C

0

Answer 1

When installed on your 2019 GMC Sierra 1500 the Curt Front Mount Trailer Hitch #C31088 will extend close to even with the front bumper under the truck. I have attached an image of the hitch installed on your truck that you can use for reference. We…

view full answer...

Answer 2

I recommend going with the Curt Front Mount Trailer Hitch Receiver #C31088 for your 2021 Chevy Silverado 1500 because the receiver fits snug up to your front bumper so you only have to make a smaller cutout in the front bumper as opposed to a solid…

view full answer...

Answer 3

We haven't had a chance to install the #C31088 on the 2020 GMC Sierra 1500 or similar models yet so we do not have an installation video at this time. The best I can offer are the written instructions which I attached below. The process isn't…

view full answer...

Answer 4

Yes, the Curt Front Mount Trailer Hitch Receiver part #C31088 is a confirmed fit for a 2020 Chevrolet Silverado 1500 Trail Boss. I confirmed this with my contact at Curt for you as well. The Curt Trailer Hitch is a direct bolt-on fit so no drilling…

view full answer...

Answer 5

For your 2020 GMC Sierra 1500 AT4 we have the Curt front hitch part #C31088 as a confirmed fit. The only versions of your truck this does not fit are the diesel models.

view full answer...

Answer 6

Yes, when you install the Curt hitch part #C14006 on your 2016 Chevy Silverado 1500 the bumper would support itself as you remove the hardware needed. You wouldn't need to brace the bumper. For more info on the install check out the install video…

view full answer...

Answer 7

We have the parts you'd need to flat tow your 2020 Chevy Silverado 1500 but you can't use a front hitch for that since they aren't designed for that. Instead you'd need a base plate kit like the part #BLU54VR which is a confirmed fit…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

So long as your 2020 Chevy Silverado 1500 is a gas version and not a diesel, then the EcoHitch front hitch you asked about does indeed fit, with the correct part number being the following: - EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH58RR…

view full answer...

Front Hitch Options for 2020 GMC Sierra 1500

Products Featured in This Question

Continue Researching