How to Measure so an Axle can be Replaced on a Boat trailer
Updated 07/29/2021 | Published 07/28/2021
Question:
I have a 1999 dorsey boat trailer with a 6k grwr it has a square axle with leafsprings and on the back of one of the hubs it says 8-248 Mta16. There is no brakes on this axle only rear has brakes. Im looking to get a new axle because mine is bent but all the ways to measure it dont work bc i have no face to measure from
asked by: Dale
Expert Reply:
The axles on a tandem axle trailer should be the same size. Hubs that include drums will also measure the same as an idler hub from face to face on an axle. With that being said, I suggest measuring the undamaged axle. This should get you all the needed measurements to find the correct replacement.
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: demco coupler
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Q&A: Can Slightly Shorter Trailer Axle be Used in Place of Longer one
- Q&A: Idler Trailer Axle Placement On a Tandem Axle Trailer
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Dexter Hydraulic Brake Lines and Fittings for Single-Axle, Torsion-Axle Trailers
- Article: Trailer Wiring Diagrams
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer wiring
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Shop: Brake Controller
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: trailer jack
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Instructions to Wire a Trailer for Electric Brakes
on Trailer Hubs and Drums
