Adding a Brake Mounting Flange to Axle That Had Brake Backing Plate Welded To Axle
Updated 05/06/2021 | Published 05/05/2021 >
Products Featured in This Question
Question:
Is there a flange available that can be welded on the axle tube for the brake backing plate? I have an old homemade trailer and the backing plate is welded to the axle tube instead of bolted so I would need to either get a brake kit without backing plates or cut it off and get a flange to weld on. What would you suggest?
asked by: Craig K
Helpful Expert Reply:
The Brake Mounting Flange for 3" Round Axle # 4-44-1 will allow you to weld on the brake flange to a 3" axle. This will be the correct pattern for your Dexter Electric Trailer Brake Kit # 23-105-106.
There are also Brake Mounting Flange for 2-3/8" Round Axles # 4-35 and Trailer Brake Mounting Flange for 3-1/2" Axles # 4-50. These will use different brake assemblies due to having a different axle size.
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: chrome lug nuts
- Search Results: trailer tires and wheels
- Search Results: trailer tires
- Search Results: l44649
- Search Results: brake flange
- Search Results: electric brake wiring kit
- Search Results: 3500 lbs axle trailer brakes
- Shop: Brake Mounting Flange for 2-3/8" Round Axle
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Shop: Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 3" Pilot Hole
- Q&A: Do I Need Brakes On Both Axles of a Car Hauler Trailer?
- Q&A: Should Trailer Brakes Go On Front Axle or Rear Axle of Tandem Axle Trailer
- Shop: Taskmaster Trailer Wheel Lug Nut - Chrome Plated - 1/2"-20
- Shop: Kenda Karrier KR53 ST225/75R15 Radial Trailer Tire with 15" Black Aluminum Wheel - 6 on 5-1/2
- Shop: Fire Engine Red Color Inserts for Americana 15" 5 on 4-1/2 AM06 Wheels
- Shop: Aluminum AM06 Black Machined Trailer Wheel w/ Red Inserts - 15" x 5" Rim - 5 on 4-1/2
- Q&A: How Should a Trailer Brake Mounting Flange be Welded to a Trailer
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Trailer Hitch
- Q&A: How to Wire Electric Brakes on a Tandem Axle Trailer
- Q&A: Which Trailer Axle Company is Best, Lippert Dexter or Al Ko
- Video: TruRyde Trailer Suspension TRSS238 Review
- Video: Review of CE Smith Trailer Suspension Parts - Spring Seat Typical 3500lb Trailer Axle - CES88WR
- Q&A: How To Choose The Correct Brake Mounting Flange For Your Trailer Axle
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Video: Comprehensive Review: Brake Mounting Flange for 2-3/8" Round Axle
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Video: Hands-On with the Electric Trailer Brake Assembly



