TorkLift 36 Inch Hitch Extender for Ford Factory 3 Inch Receiver Hitch

Question

Question:

Would this work with a model year 2016 that also has 3inch factory receiver?

asked by: Roderick W

0

Expert Reply:

I am a bit confused, because I was under the impression that Ford didn't begin offering the 3 inch hitch until the 2017 model year.

As long as the hitch on your 2016 Ford truck is the 3 inch factory receiver, the Torklift # TLE1636 will be compatible.

if you need an extension for the 7-way trailer connector, use part # TLW6036.

expert reply by: Mike L

0

Answer 1

Both the Curt #C45048 and the Reese #RP45292 hitch extensions would require using a 3 inch to 2-1/2 inch reducer sleeve #BWRHXA2183. This would work pretty well for towing but it would allow a hitch mounted accessory like a bike rack to bounce about…

view full answer...

Answer 2

I wouldn't say it's common for a sleeve style hitch adapter like the #DTADP35 to be difficult to remove from a 2-1/2 hitch...unless it's a Ford hitch as they sometimes have corners that are more radiused which creates issues. On a 2016…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hi Jim! As long as your 2026 Alliance Valor 37V11 has the Lippert Rhino box currently, the B&W 5th Wheel to Gooseneck Pin Box - Lippert Rhino - 25K GTW - 3.25K TW #BW23RV will indeed fit. If you have a different pin box, just let me know and I…

view full answer...

Answer 9

Hello David, Thanks so much for reaching out! For your 2026 Ford F-350 diesel dually, you will want the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH54QR. This is the only front mount option we offer that is confirmed…

view full answer...

Answer 10

Hey Kevin! Yes, the B&W 5th Wheel to Gooseneck Pin Box #BW55RV will fit the 2026 Brinkley Model Z 2680. The Curt Helux only fits a Lippert Rhino bolt pattern so that makes it easy to identify. The B&W is designed for the Rhino as well so it…

view full answer...

Answer 11

Hello Jeff, Sounds like you’ve got a big camper (about 4,000 lbs) on your 2024 F-350 dually, and when it’s loaded, the truck feels bouncy and sways a bit. That’s pretty common with heavy campers, especially if the suspension is still stock.…

view full answer...

Answer 12

Hey Steve, we have the EcoHitch front hitch part #EH54QR as a confirmed fit for your 2025 Ford F-350 dually.

view full answer...

TorkLift 36 Inch Hitch Extender for Ford Factory 3 Inch Receiver Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching