How To Reduce Strain On Rear Suspension Of 2019 Toyota Highlander Hybrid When Towing 2700lb Trailer

Question

Question:

Im towing about 2700 pounds and want to boost my rear suspension. What are my options?

asked by: Howie R

0

Expert Reply:

I have a different option for you, but at this time there is not a rear suspension enhancement option confirmed to fit your 2019 Toyota Highlander Hybrid.

Instead to help to keep your suspension from sagging I recommend adding a weight distribution hitch which redistributes the weight of the trailer from just the rear axle of your Highlander to each axle of the of the trailer and vehicle. This is helpful in keeping weight on your front axle to improve braking and turning while towing.

To determine the correct weight distribution hitch for your setup you will need to find your total tongue weight. Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your Highlander.

The easiest way to get an accurate tongue weight rating is with a tongue weight scale like the # e99044 but there are other methods outlined in the included help article.

Since you mentioned your trailer is about 2700lbs you should expect to see between 270-405lbs of tongue weight.

For a system that works with that range I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW # FA92-00-0600 which works with total tongue weights between 250-600lbs. This hitch does not include a hitch ball so you will need 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286 to match the coupler on your trailer.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Hey Michael, thanks for reaching out. So, there isn't a square panel for the Redarc Tow Pro liberty controller, so if you want to use that on your 2025 Tacoma, you will have to do so without the panel. That said, what you can do is get the Redarc…

view full answer...

Answer 2

Although the #AL60732 Air Lift air helper spring system you'd looked at isn't a fit for your vehicle, we do offer an option that would work for you. SuperSprings offers a Coil SumoSpring product for the 2020 Toyota Highlander gas engine…

view full answer...

Answer 3

Part #CSS-1145 and part #CSS-1145R are identical helper springs. They are designed to fit the rear only for your 2013 Dodge Durango. Originally these were designed for both the front and back and the R indicated they were to be used on the rear only.…

view full answer...

Answer 4

The correct Coil SumoSprings for your 2020 Toyota Highlander include the following: Front - #CSS-1145 Rear - #CSS-1125 These are different sizes which makes sense since you're seeing different measurements between your front and rear coils.…

view full answer...

Answer 5

The Coil SumoSprings Custom Helper Springs #CSS-1145 and #CSS-1145R are exactly the same. We also have the #CSS-1145F which is the same. We created the Rear #CSS-1145R and Front #CSS-1145F specific products to eliminate confusion when looking up the…

view full answer...

Answer 6

The Coil SumoSprings Custom Helper Springs part #CSS-1145 for AWD or part #CSS-1125 for FWD will use one spacer per coil spring, you cannot use two per side nor would you want to as the ride would be too stiff but there is not enough room anyhow.…

view full answer...

Answer 7

There might very well be a set of Coil SumoSprings Custom Helper Springs that will fit your 2008 Honda Ridgeline 4x4. However, in order to confirm the correct part number I would need you to take the measurements in the attached photo. Once you have…

view full answer...

Answer 8

The 2023 Toyota Highlander does not have a factory tow port or custom wiring harness for brake controller installation. However, if you're installing the Tekonsha 7-way #TK57VR you were looking at it comes with an adapter that will plug into…

view full answer...

Answer 9

Yes, the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK57VR is what you want to get a fully functioning 7-Way on your 2023 Toyota Highlander. I also recommend picking up the mounting brackets #PK12711U and #C57202 to…

view full answer...

Answer 10

The easiest way to install a brake controller on your 2022 Toyota Highlander with a 4-way is to first install a 7-way kit with the part #TK57VR which includes brake controller wiring as well. Then for a brake controller the Curt Echo Mobile part…

view full answer...

Answer 11

Hello Dan, We can most definitely get you set up to use your Redarc Tow-Pro Liberty brake controller in your 2022 Toyota Highlander. Since you were looking at the #ETBC7, I’m assuming your Highlander does not have the factory tow package. To equip…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

How To Reduce Strain On Rear Suspension Of 2019 Toyota Highlander Hybrid When Towing 2700lb Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching