How To Prevent Sag While Towing with a 2008 Honda Ridgeline 4x4

Question

Question:

A: ~6inches B: 5/8” C: 1” D: 1” E: 1-3/4” F: 1-3/4”

asked by: Kevin A

0

Expert Reply:

There might very well be a set of Coil SumoSprings Custom Helper Springs that will fit your 2008 Honda Ridgeline 4x4. However, in order to confirm the correct part number I would need you to take the measurements in the attached photo. Once you have done this I can then see if there are a set of Coil SumoSprings Custom Helper Springs available but this is your only option as no one else makes a set of suspension enhancements for this vehicle.

expert reply by: Conner L

0

click to enlarge

Kevin

12/18/2019

A: ~6inches B: 5/8” C: 1” D: 1” E: 1-3/4” F: 1-3/4”

Conner L.

12/18/2019

I just spoke with SuperSprings and they informed me that you need to use the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension part # CSS-1145.

Answer 1

Yes, the SumoSprings #CSS-1094F and #SS36EV can be used simultaneously on your 2023 Ford Bronco. They install in completely different locations so they won't interfere with each other and will work together to add additional support. Just to be…

view full answer...

Answer 2

The Coil SumoSprings Custom Helper Springs #CSS-1145 and #CSS-1145R are exactly the same. We also have the #CSS-1145F which is the same. We created the Rear #CSS-1145R and Front #CSS-1145F specific products to eliminate confusion when looking up the…

view full answer...

Answer 3

Part #CSS-1145 and part #CSS-1145R are identical helper springs. They are designed to fit the rear only for your 2013 Dodge Durango. Originally these were designed for both the front and back and the R indicated they were to be used on the rear only.…

view full answer...

Answer 4

Hi Nick, No, you don't need zip ties for the Coil SumoSprings #CSS-1168R; some people use them but the spring should seat nicely into the coils without them so they aren't necessary.

view full answer...

Answer 5

Hey Michael, thanks for reaching out. So, there isn't a square panel for the Redarc Tow Pro liberty controller, so if you want to use that on your 2025 Tacoma, you will have to do so without the panel. That said, what you can do is get the Redarc…

view full answer...

Answer 6

I have a different option for you, but at this time there is not a rear suspension enhancement option confirmed to fit your 2019 Toyota Highlander Hybrid. Instead to help to keep your suspension from sagging I recommend adding a weight distribution…

view full answer...

Answer 7

The correct Coil SumoSprings for your 2020 Toyota Highlander include the following: Front - #CSS-1145 Rear - #CSS-1125 These are different sizes which makes sense since you're seeing different measurements between your front and rear coils.…

view full answer...

Answer 8

Although the #AL60732 Air Lift air helper spring system you'd looked at isn't a fit for your vehicle, we do offer an option that would work for you. SuperSprings offers a Coil SumoSpring product for the 2020 Toyota Highlander gas engine…

view full answer...

Answer 9

The Coil SumoSprings Custom Helper Springs part #CSS-1145 for AWD or part #CSS-1125 for FWD will use one spacer per coil spring, you cannot use two per side nor would you want to as the ride would be too stiff but there is not enough room anyhow.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

How To Prevent Sag While Towing with a 2008 Honda Ridgeline 4x4

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching