Does Draw Tite Hitch for 2017 Chrysler Pacifica Interfere with Hands Free Liftgate

Question

Question:

Hi. Will this effect the kick open feature we have on our Pacifica? We can kick our foot under the rear bumper for the back hatch to open. Thanks

asked by: Frank S

0

Expert Reply:

That Draw Tite hitch part # 36798-SK that fits the 2017 Chrysler Pacifica Hybrid (non-hybrid models use # 36798) does not interfere with the hands free liftgate you mentioned. At worst you'd just need to kick to either side of the hitch opening and you'd be set.

expert reply by: Jameson C

0

Answer 1

The Draw-Tite Trailer Hitch Receiver Class II 1-1/4" part #36798-SK is the only option for a concealed cross tube on the 2020 Chrysler Pacifica Hybrid. The Draw-Tite hitch will give you a 1-1/4" receiver on the back of the Pacifica so as…

view full answer...

Answer 2

For a 55 lbs bike you're definitely going to need to use a hitch mounted bike rack. No roof mounted bike rack has that high of a capacity. The best one for your EMTB is going to be the Thule Epos Bike Rack item #TH99XE. This is our highest…

view full answer...

Answer 3

Yes and no. The Thule Epos Bike Rack #TH99XE has a unique strap system that makes it compatible with literally any bike frame style and whether the bike has fenders or not, but there is one restriction with the strap and that's on the front tire…

view full answer...

Answer 4

Hello Randy. We very well may have an installer in your area. I am not sure if any of these dealers would have the etrailer Trailer Hitch Receiver #e98903 actually stocked at their location, but we can easily ship one to you and get it in your hands…

view full answer...

Answer 5

Hey Kenneth, thanks for the question and it's a good one as you're right, there are some bike racks deemed not suitable for use on a front hitch. So I did some digging, and since there's only a couple options for your 71 lb step-thru…

view full answer...

Answer 6

I recommend installing the etrailer Trailer Hitch Receiver #e98903 on your 2024 Chrysler Pacifica. This has the larger 2" receiver opening which will allow you to carry the Yakima StageTwo Bike Rack for 4 Bikes #Y85AR. This is going to be the…

view full answer...

Answer 7

The only bike racks that have ramps that pull out are 2-bike racks like the Thule EasyFold XT part #TH903202 which would easily have the capacity needed for a 60 lb bike.

view full answer...

Answer 8

From the sounds of your question, I assume you are talking about the Hollywood Racks Sport Rider SE #HLY84FR. If this is the rack you are referring to, yes! It works with 20" diameter tires as long as you have the adapter #HLY24FR for each bike.…

view full answer...

Answer 9

Hey Bob, There is indeed a loading ramp from Thule that will work with any of the Epos bike racks - the Thule Epos 3-Bike Rack #TH69XE, Thule Epos 2-Bike Rack w/ LED Lights #TH49XE, and Thule Epos 2-Bike Rack #TH99XE. I went ahead and verified for…

view full answer...

Answer 10

Just a single difference exists between the Curt and etrailer trailer hitches for your 2024 Chrysler Pacifica, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black finish, so you can choose which…

view full answer...

Answer 11

Multiple hitch adapters like your #RM-077-10 and #BX88265 can not be used together. You'd be adding one more breaking point into the mix there and running the risk of something happening and the vehicle being loose on the road. The Thule EasyFold…

view full answer...

Answer 12

Thanks for reaching out, Roy! The term "best" can be a little subjective since everyone has their own experiences and needs/wants, but in regards to which bike rack has the best features it is the Thule Epos Bike Rack #TH99XE hands-down…

view full answer...

Does Draw Tite Hitch for 2017 Chrysler Pacifica Interfere with Hands Free Liftgate

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching