Pre-Greased Hub/Drum for 3500 lb Spindles on 2018 R Pod 178 and Four Winns D0210S02 Trailer

Updated 04/28/2021 | Published 04/23/2021

Products Featured in This Question

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased

(1744)

$101.32

Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased

(1743)

$188.71

Question:

If you have a 3500 lb axle, you'll have a 5 on 4-1/2 inch bolt pattern. You can confirm this by measuring the center to center distance between 2 adjacent wheel studs. If it's 2-5/8 of an inch, you absolutely for certain have a 5 on 4-1/2 which is typical for a 3500 lb axle. The # AKHD-545-35-EZ-K 10 inch hub/drum you looked at is compatible with a 3500 lb axle, it uses an L68149 inner and an L44649 outer bearing and a 58846 grease seal and has a 5 on 4-1/2 inch bolt pattern. The bearings, races, grease seal, the grease, the E-Z Lube and standard spindle compatible dust caps and lug nuts are all included. The hub/drum is compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO. I've linked to an article that explains how to determine the wheel bolt pattern as well as to a video that shows how to install the hub/drum.

asked by: Dan

Helpful Expert Reply:

If you have a 3500 lb axle, you'll have a 5 on 4-1/2 inch bolt pattern. You can confirm this by measuring the center to center distance between 2 adjacent wheel studs. If it's 2-5/8 of an inch, you absolutely for certain have a 5 on 4-1/2 which is typical for a 3500 lb axle.

The # AKHD-545-35-EZ-K 10 inch hub/drum you looked at is compatible with a 3500 lb axle, it uses an L68149 inner and an L44649 outer bearing and a 58846 grease seal and has a 5 on 4-1/2 inch bolt pattern. The bearings, races, grease seal, the grease, the E-Z Lube and standard spindle compatible dust caps and lug nuts are all included. The hub/drum is compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO.

I've linked to an article that explains how to determine the wheel bolt pattern as well as to a video that shows how to install the hub/drum.

expert reply by: Mike L

Dan

4/23/2021

Mike L.

4/28/2021

The # AKHD-655-6-EZ-K hub/drum you'd looked at would be the direct replacement for the 5200 lb hubs on your Four Winns D0210S02 trailer. The hub has the same 6 on 5-1/2 inch bolt pattern, and uses the same 25580 inner/15123 outer wheel bearing and the same GS2250DL grease seal. The hub/drum includes the inner and outer bearings, the races, the grease seal, both an E-Z Lube and standard dust cap and lug nuts. The hub is pre-greased.