Roadmaster Supplemental Braking Replacement Brake Pedal Clamp

Question

Question:

Will this adapter fit the older Classic Brake Buddys?

asked by: Frank O

0

Expert Reply:

The Replacement Brake Pedal Clamp, # RM-9329-VW, is designed for use with the Roadmaster Supplemental Braking Systems.

expert reply by: Michael R

0

Answer 1

view full answer...

Answer 2

There are a couple of things you can do. First, you could convert the vehicle side connector to a 7-Way by using #47435, which is just an adapter. This is going to be the easiest way to be able to use the 7-Way on the trailer without having to…

view full answer...

Answer 3

Yeah, I am not going to be much help without a model number or part number either. If by receiver you mean remote, we have the Replacement Remote for Brake Buddy Select Flat Tow Brake Systems item #HM39505. It works with the Vantage Select, Select…

view full answer...

Answer 4

The Second Vehicle Breakaway Kit for Blue Ox Patriot Supplemental Braking Systems #BRK2505 is designed to work with the Blue Ox Patriot BRK2012 (NLA), Patriot II BRK2010 (NLA), BRK2016 (NLA), or the Patriot 3 BRK2019 (NLA). Unfortunately, this will…

view full answer...

Answer 5

The wireless remote that comes with the Brake Buddy Select 3 #HM39524 is designed to sit in the cab of your RV and still be able to communicate with the portable system that is mounted in your towed vehicle. You won't need a signal booster to use…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Roadmaster Supplemental Braking Replacement Brake Pedal Clamp

Product Page this Question was Asked From

Continue Researching