Solution for Lance Camper Wiring that Has Lance Connections

Updated 04/15/2021 | Published 04/14/2021

Products Featured in This Question

7-Way Round RV Style Trailer Connector - Trailer Side

(388)

$13.89

12 Gauge 7 Conductor Jacketed Wire - Per Foot

(515)

$10.77

Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End

(347)

$13.29

Question:

My lance camper has a Lance proprietary 6-pin round connector. I am looking for an extension so I can connect my camper after its in the bed of the truck, vs. connecting it while loading the camper, before the camper gets up to the front of the bed. I really dont want to have to buy a Truck Endinch Lance wire set for $90, and then also buy a Camper Endinch wire set for another $90, and splice them together to make an extension cable - is there anything made for this purpose? I am just looking for a 2foot or 3foot extension cable that passes all the signals from the truck to the camper, so I can connect the cable to the camper after the camper is fully loaded and thereby avoid the hassle of stopping mid-load to connect a cable and connector that are hidden once the camper is in the bed of the truck.

asked by: Steve O

Expert Reply:

If you'd be willing to cut off the Lance connectors and wire in 6-ways or 7-ways in place of them we can help, but at this time only Lance can get you that specific connector. You could use the part # A7WCB with the # PK12-707E and you'd have a much more universal setup.

Then for jacketed 7-way wiring you could use the part # DW04914-1 which we sell by the foot.

expert reply by: Jameson C