Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
That's a fine question. Unlike many things in this world the companies like Kinedyne, Erickson and Cargo Smart all made the tracks the same size! So luckily for us we can use any of the e-track or x-track accessories like the Erickson E-Chock…
view full answer...The legs for the CargoSmart Folding Workbench Brackets #3481744 will sit 22-21/2" away from the wall when in the deployed position, and then the brackets are 2-1/2" tall so they will stick out that far from the wall. My contact at…
view full answer...To use the Detail K2 II snow plow part #K2RAMP8219 on your 2021 Toyota Tundra the correct install kit is the part #K285113.
view full answer...When securing your motorcycle inside your enclosed 12 foot long trailer using a chock like the Tow-Rax #TWSPWM the most important factor to consider is the trailer's tongue weight. You will just want to make sure that its tongue weight with the…
view full answer...The equalizer of a tandem axle trailer is not the balance point of the trailer. I would recommend putting the wheel chocks of your trailer as far forward as you can in the trailer. This will help prevent any potential sway that can occur from not…
view full answer...The Erickson E-Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks #EM58523-09162-4 would work great but does require e-track under the side by side tires like with the part #e25VR. This setup is definitely long enough to…
view full answer...The Brophy J-Hooks that we have available are parts #ETJR and #ETJS. Part #ETJR has an inner width of 4-1/4" with a 1/2" hook diameter while the part #ETJS has an inner width of 2" with a 3/8" hook diameter. Review videos have…
view full answer...The Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 16' Long - Gray #290-46004 would work for your 7' x 16' enclosed trailer, but there is a chance that it doesn't completely cover the bottom of the wheels and tires since it…
view full answer...Based on the picture you provided it does look like your 1985 Hale Horse Trailer uses the AL-KO 4-bolt pattern and would require you to use the Dexter Electric Brake Kit #23-105-106-09. This kit is designed for 6000lb axles and measures 12" x…
view full answer...Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
view full answer...You have a very unique situation. We don't have anything specific to help you with your angle directly, however, you have already done a lot of the work figuring angles and rise needed. I recommend using the Race Ramps Rack Ramps - 5" Lift -…
view full answer...For an enclosed cargo trailer the Rack Em Ladder Rack part #RA-28 would be a great option. It has a 400 lb capacity and can telescope to fit roofs that are between 4 feet and 8-1/2 feet wide.
view full answer...Filter Your Search
Contact and Help