To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These front tie-downs bolt right to the truck’s frame to give your camper a rock-solid base. By mounting to the frame instead of the bed or bumper, they spread the camper’s weight evenly and keep the center of gravity low. That makes for a stable, comfortable ride even on long hauls or rough roads. Because the tie-downs stay tight to the frame, there’s minimal loss of ground clearance and less chance of dragging or snagging when driving off-road or over uneven ground.
Each tie-down pairs rustproof aluminum arms with stainless steel receiver brackets for heavy-duty strength that won’t corrode. The aluminum keeps things light and easy to handle while still standing up to vibration and stress. A high-impact powder coat adds another layer of protection so the setup holds up through harsh weather, salted roads, and years of use.
When the trip’s over, pull the arms out and the brackets virtually disappear under the truck. The frame-mounted design keeps everything tucked up and out of sight so you don’t have bulky hardware hanging down. It’s a smart way to keep your truck looking clean between adventures.

These tie-downs are built for a custom fit and use pre-existing holes in the frame, so installation takes minimal time and there’s no need to cut or modify anything. The bolt-on setup locks in tight for a secure fit that keeps your truck’s frame strong and intact. Two anchor holes on each arm let you fine-tune your connection for proper turnbuckle alignment and tension once you’re ready to load up.


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey, everybody, Jared at etrailer.com. Today I want to take a quick look at the front frame-mounted Talon Camper Tie-Downs by Torklift. Now this is a custom fit product. This is designed to fit the 2019 through 2021 Ram 3,500 with a six and a half foot bed. According to the manufacturer, it does not fit if there are running boards or tube steps that extend beyond the cab and run along the bed. On a custom part like this, I always recommend that you go to our website and put your vehicle information into our fit guide and ensure a proper fit.
Now, this setup is for front-mounted Camper Tie-Downs. The rear-mounted Camper Tie-Downs would be sold separately. This will help you attach your truck camper confidently by attaching your Tie-Downs to the strongest part of your truck, which is the frame. The mounts will help its stability and vehicle handling. And it's the safest way to haul your truck camper.
It'll prevent vehicle sway and camper movement in all directions. And vehicle manufacturers do recommend that full height camper bodies be directly attached to your vehicle frame structure. This was, securing at the base, rather than the bed, will help distribute the weight and keep the setup from being too top heavy. It also helps to avoid bed and bumper damage which is common with other tie-downs systems. Now, one of the tie-downs is not to the driver's side and the other will be mounted to your passenger side.
The two holes at the tie-down inserts will allow you to attach your turnbuckles from your camper to your truck and not interfere with anything on your vehicle. There's also two holes here at the shank insert which will offer different width campers. Now, this is a fast, no drill install and there is no loss of clearance with the tie-down system. The brackets are made of stainless steel and the inserts are made of aluminum and they all have a black powder coat finish to help prevent rust. Now this includes both passenger and driver's side frame-mounted brackets and front tie-down inserts and all necessary hardware.
And it has a nice set of instructions here, explaining the installation. If we consider the dimensions, we do have a mounting bracket length, 13 inches. The maximum length, at its widest option, including the inset, is 27 and a quarter inches. And the minimum length, at its narrowest option, including the insert, is 23, 23 and three eights inches, within install. Now, when you're not using your tie-downs, alls you have to do is pull the pin here. You remove the insert from the frame mounted bracket and without the inserts, the bracket mounted to the frame will hide away. It'll give your truck the back-to-factory-look. Now when you're using your tie-downs, simply put the insert back in. You're going to find the hole which is going to accommodate your truck and your camper width. Alright, replace the pin and then you're good to go. There is a lifetime warranty attached to this product and it's made in the USA, a standard quality you know and trust. Alright, well let's load our front frame-mounted Talon Camper Tie-Downs by Torklift. I'm Jared with each etrailer.com. You have a good one..
Ratings & Reviews

Camden
4/27/2025
Great, drove 2.5 hrs with with wind gusts to 60 mph without any issues. The tie downs held the camper securely on the truck.

Robert M.
3/31/2020
Great product...highly recommend!

Gilbert H.
2/22/2018
I have made about six trips this year and the Torklift truck camper tie down system has worked great. It is the only truck camper unit I would recommend.

Robert
7/11/2024
Tie downs are still installed on my 2022 GMC and are working well in holding my camper in place.

Thomas
7/13/2024
Fit the truck ez to install. Works great.
Do you have a question about this Truck Camper Tie Down?
Condition: Installed
Notes: There are install marks from previously being test fitted. There are also paint chips. All hardware is included.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Jenny N.
8/18/2023
I wanted to touch base with you in regard to the Torklift tie downs. Have you heard back from Torklift? May I ask what type of hitch you have on the truck? What type of cab do you have? Is it an 8 foot bed? Do you have running boards that extend past the cab?