Which Timbren Kit Fits 2019 Ram 2500 4x4 Towing Fifth Wheel Trailer

Question

Question:

I have a 2019 Ram 2500 Diesel 4X4, 6foot 4inch bed. Im towing a 5th wheel. Looking to get the right part for the rear axel. What is your suggestion?

asked by: Scott M

1

Helpful Expert Reply:

The Timbren suspension enhancement kit part # TDR2500D that you referenced is a correct fit for your 2019 Ram 2500 diesel 4x4 and is compatible with in-bed hitches like your fifth wheel so it would fit and work great for your application.

expert reply by: Jameson C

1

Answer 1

That's a good question, and the answer is nope, the Timbren Rear Suspension Enhancement System #TDR2500D will not interfere with the function of your weight distribution hitch when towing your trailer.

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Nice setup Jeff, happy to help! Since you've already ordered the B&W Turnoverball for your 2019 Ram 2500, my recommendation is the B&W Companion Sliding 5th Wheel Hitch #BWRVK3400-5W that's designed for the Turnoverball system.…

view full answer...

Answer 9

Hey Shayne, yes the Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY57ND that you referenced would need the included spacers to install in place of a Lippert 1716 pin box as that pin box is 1/2 inch wider. What camper do you have? At this time…

view full answer...

Answer 10

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Answer 11

Hey Brian, the Blind Spot Monitoring System for Towable Campers, Travel Trailers, and 5th Wheels Up to 30' Long #CU65XR that you referenced can give you a blind spot monitoring system but its not going to integrate into your vehicle wiring. It is…

view full answer...

Answer 12

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Which Timbren Kit Fits 2019 Ram 2500 4x4 Towing Fifth Wheel Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching