Which AirLift Suspension Enhancement System Is Recommended For 2020 Jeep Wrangler Rubicon?

Updated 03/16/2021 | Published 03/10/2021

Products Featured in This Question

Air Lift 1000 Air Helper Springs for Coil Springs - Rear

(1220)

$142.49

Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing

(142)

$16.57

Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 2" Lift - Qty 2

(43)

$94.14

Timbren Front or Rear Suspension Enhancement System

(6)

$269.36

Question:

Hello, I have Jeep rubicon jlu 2020 with 2 inch mopar lift kit. I want to know if you have the part number for airlift 1000 front and rear on my jeep. Thank you! ??

asked by: Sylvain G

Expert Reply:

The correct rear Air Lift system for your 2020 Jeep Wrangler Unlimited is Air Lift 1000 Air Helper Springs for Coil Springs - Rear # AL60829. This will drastically reduce rear-end sag and also improve handling and reduce body roll. In order to determine which spacers you need, you will need to measure the lift blocks on your vehicle. If they are in fact 2" then you can use Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 2" Lift # AL52420.

In regard to the front suspension, there is actually no air bag setup that fits your vehicle. You will likely be fine with just the rear suspension enhancement, but if you happen to have a snow plow or some other heavy item on the front of your Jeep then you could look into a jounce-style spring such as Timbren Front Suspension Enhancement # TJFTJ. You will need Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing # A25723-90AH00, possibly 2 per side since you have a 2" lift. These jounce springs replace the factory bump stops and assist the factory suspension when excess weight is added to the vehicle. These are rated for 2,400lbs.

I attached several demonstration videos for you to check out.

expert reply by: Andrew N