Recommend Rear SumoSprings For Jeep Wrangler with SSF-403-54 Front Springs

Question

Question:

Hi, I am planning on purchasing SSF-403-54 because it appears to support my current lift at 3. The suspension manufacturer suggests 3inch bumpstops, and I would likely add a 1inch bottom bumpstop to compliment the front sumo springs. My question - what rear sumo springs do you recommend that compliments the SSF-403-54? I do not tow, but my jeep is fairly heavy and setup for overland trips. My jeep has full armor, steel bumpers, fridge, custom cabinet, 10 gallon auxiliary gas tank, and also a full rhino rack and backbone system. Currently, Im leaning towards the SSR-405-47 and supplement a 1inch bottom bumpstop. Any advise would be helpful.

asked by: Don C

0

Expert Reply:

Hello Don,

The SumoSprings Solo Custom Helper Springs for Jeep - Front Axle - Off-Road - 2" Lift Spacers # SSF-403-54 has a height of 3.800 inches. The # SSR-405-47 has a height of 4.5 inches an a capacity of 2,500 lbs. I do believe the SumoSprings Solo Custom Helper Springs for Jeep - Rear Axle # SSR-405-47 are the better option for your application.

expert reply by: Kate F

0

Answer 1

Hello Lu, thanks for reaching out. For a stock height 2023 Jeep Wrangler JLU you will want the SumoSprings without the 1" spacers. What I recommend is the following: - SumoSprings Solo Custom Helper Springs for Jeep - Front Axle - Off-Road…

view full answer...

Answer 2

Hey Stefan! The Coil SumoSprings are all the same so there won't be a difference in support between part numbers. Is there a particular reason you want to install these? If it is for something like towing I would stick with the rear since that is…

view full answer...

Answer 3

The Coil SumoSprings #CSS-1094F that fit on the front axle of your 2010 Ford Expedition 4WD will not be of great benefit for you when towing. They are generally used when you have a front hitch and snow plow or something like a bull bar or grill…

view full answer...

Answer 4

I do have a great option for you, however the Timbren Front or Rear Suspension Enhancement System #TJFTJ that you referenced will not work on your lifted 2000 Jeep Wrangler TJ. I spoke with my contact at Timbren and he said that if you have a true…

view full answer...

Answer 5

The SumoSprings Solo Custom Helper Springs item #SSR-405-47 that fit a 2012 - 2023 Jeep Wrangler should have a 1/2" to an 1" of space between them and your axle.

view full answer...

Answer 6

Yes, the SumoSprings #CSS-1094F and #SS36EV can be used simultaneously on your 2023 Ford Bronco. They install in completely different locations so they won't interfere with each other and will work together to add additional support. Just to be…

view full answer...

Answer 7

For your 2013 Jeep Wrangler JK Unlimited I recommend the Hidden Hitch Ball Mount #80232. This ball mount has a length of 15-3/4"(400mm) from center of hitch pin hole to center of ball hole. That will give you an additional 3-15/16"(100mm)…

view full answer...

Recommend Rear SumoSprings For Jeep Wrangler with SSF-403-54 Front Springs

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching