Ground Clearance of Class III Hitches Available for 2021 Toyota RAV4
Updated 02/18/2021 | Published 02/16/2021 >
Products Featured in This Question
Question:
Hi, I am picking up a 2021 Toyota Rav 4 hybrid today. We need a 2 hitch for our 1 up bike rack. I see that both the Curt and the Draw site are recommended for ease of install however both will impact ground clearance more than the eco brand. I do not want to cut into the facia. I see one tech mentions the draw site gives more ground clearance than the Curt? But another review says they are the same. Can you clarify please? Thank you.
asked by: Ted B
Expert Reply:
The Draw-Tite # DT82QR and the Curt # C13416 will offer the same 9-1/2 inches of ground clearance under the bottom of the receiver tube. I don't have that figure for the EcoHitch # EH97FR as we haven't installed one yet, but the ground clearance will be greater than the Curt or Draw-Tite by virtue of the fact that the fascia will be trimmed, which allows the hitch to sit higher. The increased ground clearance offered by the EcoHitch is it's only benefit over the other two choices and it costs almost twice as much. Neither the Curt nor the Draw-Tite hitch would require trimming the bumper fascia.
If I had to choose between the Curt and the Draw-Tite class III hitch, I'd choose the Curt # C13416 as the hitch is manufactured in the US. If your RAV4 has the hands-free liftgate feature, we've found that the feature will still work after the hitch is installed, it just won't work right under where the receiver tube sits. If you wave your foot to the left or right of the receiver tube, the hands-free feature will work for you.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 4500 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Search Results: hitch covers
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Comparison of Hitch Ground Clearance for 2021 Toyota Rav4
- Q&A: Comparing The Curt # C33NR And Draw-Tite # DT82QR Trailer Hitches For Better ground Clearance
- Q&A: Most Concealed Hitch for a 2023 Toyota RAV4
- Q&A: Best Hitch Receiver for a 2022 Toyota RAV4 Hybrid
- Q&A: Draw-Tite Class III VS. Curt Class III Hitch For 2019 Toyota RAV4
- Q&A: Comparing Draw-Tite and Curt Trailer Hitches for Ground Clearance on 2020 Toyota RAV4
- Video: Installing the Draw-Tite Max-Frame Trailer Hitch Receiver on a 2025 Toyota RAV4
- Video: DIY 2020 Toyota RAV4 Installation for the Curt Trailer Hitch Receiver
- Video: DIY Install: EcoHitch Hidden Trailer Hitch Receiver on your 2020 Toyota RAV4
- Video: Top 2024 Toyota RAV4 Trailer Hitch Options
- Video: Setting up the Draw-Tite Max-Frame Trailer Hitch Receiver on a 2023 Toyota RAV4
- Video: How to Install the etrailer Trailer Hitch Receiver on a 2011 Toyota RAV4
- Video: Installation Guide for the Curt Trailer Hitch Receiver on a 2023 Toyota RAV4
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4



