What is Second Smaller Pin Hole for on Draw-Tite Hitch Receiver
Updated 10/28/2025 | Published 03/08/2025
Question:
Hi, I have the eTrailer brand tilting cargo rack. I finally assembled it yesterday with no problems, BUT the anti vibration pin is proving to be a problem. I have a Drawtite receiver hitch on my Sprinter. There are two holes. The larger one is for the pin I use when I tow my trailer. The smaller one needed some cleaning and it fits the anti-vibration pin BUT I would need to grind the receiver hole another .100 for the shank to allow it to seat flush. That cant be right, can it? The receiver hole ID is .526 which will fit the pin except for the larger shank. Please advise. Thank you!
asked by: Amy R
(click to enlarge)
(click to enlarge)
(click to enlarge)
Expert Reply:
Hey Amy, thanks for reaching out!
You'll need to use the larger of the two pin holes on your Draw-Tite hitch when installing the 24x60 etrailer Cargo Carrier # e98874.
Back in the day, Draw-Tite had a special J-Style pin that fit in both pin holes but they got rid of that pin a few years ago. The larger hole is for standard hitch pins so that's what you'll want to stick with!
Let me know if you have any other questions!
Product Page this Question was Asked From
24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Tilting Carrier
- Folding Carrier
- Hitch Mount
- 500 lbs
- Fits 2 Inch Hitch
- 60 Inch Long
- Cargo
- Generators
- Steel
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Search Results: red tail light lens
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Search Results: draw~tite max~frame trailer hitch receiver
- Search Results: draw~tite trailer hitch
- Shop: LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - White Base - Red Lens
- Shop: Peterson Trailer Tail Light - Submersible - Stop, Tail, Turn - Incandescent - Oval - Red Lens
- Shop: Optronics Trailer Tail Light - Stop, Turn, Tail - Submersible - Incandescent - Oval - Red Lens
- Video: Installing the Curt Trailer Hitch Receiver on your 2022 Mazda CX-5
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: TowSmart Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Q&A: Comparing Curt Trailer Hitch C13315 and Draw-Tite 76138 For 2021 Mazda CX-5
- Q&A: How To Mount 4-Way Connector To 2020 Mazda CX-5 With Trailer Hitch Receiver
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Video: How to Choose a Trailer Brake Controller
- Article: Trailer Wiring Diagrams
- Search Results: trailer wiring
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Brake Controller
on Hitch Cargo Carrier
Jon G.
10/27/2025
Hey Amy, how did things go once you used the larger pin hole on your Draw-Tite hitch with the tilting cargo carrier? Your update could make it easier for others running into the same pin fit issue.