Can Trailer Valet RVR be Used on Trailer with Lock N Roll Articulating Hitch

Question

Question:

I am looking at buying the Trailer Valet RVR9 but my trailer has a Lock N Roll hitch. Is there an adapter available for the RVR9 which will make it work?

asked by: Alex S

0

Expert Reply:

Since there isn't an adapter for the Lock N Roll articulating couplers you wouldn't be able to use the part # TVRVR9 but you could use the Trailer Valet RVR3 part # TVRVR3 instead which instead attaches to the frame of the trailer. This bypasses the coupler attachment altogether and attaches securely to the trailer frame instead.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hi Chris! The Parkit360 Force Electric Trailer Dolly - 10,000 lbs #PA46VR has a 2 prong plug (see attached image). I will admit to be surprised by that, but that is what they decided to go with. It isn't going to hurt anything though. What are…

view full answer...

Answer 2

Hey Tom! Great question. The Parkit360 Force Electric Trailer Dolly #PA96VR (5,000 lbs) and #PA46VR (10,000 lbs) will work on an incline. However, if the grade is more than 6% you cannot use the dolly. As long as your driveway is no more than a 6%…

view full answer...

Answer 3

Hi Alex; the gauge on the Big Truck Big RV Tongue Weight Scale for Trailers #BTBRV004 has a +/- 5% full scale accuracy and displays weight in 20-lb increments up to 1,000 lbs. We also have it available with a SnapPad #BTBRV99FR. If you want something…

view full answer...

Answer 4

Hey Terry, you’re likely not doing anything wrong. The Force #PA96VR has wide 6-1/2” tires that give great traction, but they don’t pivot sharply. For tight angle turns, it helps to alternate between forward and reverse, “walking” the tongue in…

view full answer...

Answer 5

It sure will Russel. The Parkit360 Force Electric Trailer Dolly item #PA96VR has a 5,000 lbs capacity. It's going to work great with your Jayco Jay Flight SLX 195RB. It also has both a 2" and 2-5/16" hitch ball included. What kind of…

view full answer...

Answer 6

Hello Angus, I reached out to Trailer Valet and they confirmed that you cannot use the plate attachment on the 12K. They don't even sell the plate attachment separately. Trailer Valet does make a remote control trailer mover with the frame…

view full answer...

Answer 7

Hey Bill, what you want is a single piece stainless steel lug nut like the part #KALN1375S. These won't corrode, swell up, or come apart like the chrome plated ones that you tried so you'll be really happy with them. These are for 1/2 inch…

view full answer...

Answer 8

The Trailer Valet that the Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR can not be used on your Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211 as confirmed by Trailer Valet, due to the fact that the original hubs on…

view full answer...

Answer 9

Yes, the Trailer Valet XL Trailer Dolly #TVXL25 does come with solid rubber tires. We carry the replacements here with part #TVXLSR if you ever need to replace one, but Trailer Valet did upgrade from the pneumatic tires for this superior design.

view full answer...