Does Trailer Valet XL Come with Solid Rubber or Pneumatic Tires

Question

Question:

Read that the pneumatic tires had some problems, have they gone to a solid rubber tire? I am going to be at the max weight for this unit1000 and 10000

asked by: Gary

0

Expert Reply:

Yes, the Trailer Valet XL Trailer Dolly # TVXL25 does come with solid rubber tires. We carry the replacements here with part # TVXLSR if you ever need to replace one, but Trailer Valet did upgrade from the pneumatic tires for this superior design.

expert reply by: Jon G

0

Answer 1

The Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 1,000 lbs TW #TVXL25 and the other Trailer Valet products continue to use pneumatic tires. Solid tires would not give you the functionality and traction that you need…

view full answer...

Answer 2

Yes. The only difference between the Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 1,000 lbs TW #TVXL25 and the Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 1,000 lbs TW #TVXL2 is the hitch ball…

view full answer...

Answer 3

For a trailer dolly that will work with your boat and trailer, I would recommend looking at the Trailer Valet XL Trailer Dolly, #TVXL2. This trailer dolly has a tongue weight capacity of 1000 lbs which is the highest tongue weight capacity of our…

view full answer...

Answer 4

The tire part #TVTR that you referenced is a Load Range B tire in the size of 2.80/2.50-4 which means it does have a 250 lb per tire capacity. The Trailer Valet that this is used on is the #STC-V211 which has a 500 lb capacity total. The Trailer…

view full answer...

Answer 5

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 6

There are 3 different battery chargers for the Trailer Valet remote controlled dollies and the correct one just depends on the weight rating of your dolly: 3,500 lbs - #TV77FR 5,500 lbs - #TV87FR 9,000 lbs - #TV27FR Once you know the weight rating of…

view full answer...

Answer 7

The Trailer Valet that the Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR can not be used on your Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211 as confirmed by Trailer Valet, due to the fact that the original hubs on…

view full answer...

Answer 8

The Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 1,000 lbs TW #TVXL25 uses pneumatic tires. There is not a version that has solid wheels. My contact at trailer valet said they have no plans of making a version with…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does Trailer Valet XL Come with Solid Rubber or Pneumatic Tires

Products Featured in This Question

Continue Researching