Can You Replace The Pneumatic Tires On The Trailer Valet 5X Swivel Jack With Solid Rubber Tires?

Question

Question:

I spoke with Trailer Valet support today and they said the solid rubber tires will fit as replacements for the original pneumatic tires that came with the 5X, which I purchased from you in 2017. This has been confirmed by people on Youtube videos that it works, but I would like to be sure before ordering them.

asked by: Robert F

0

Expert Reply:

The Trailer Valet that the Replacement Solid Rubber Tire for Trailer Valet Trailer Mover # TVXLSR can not be used on your Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211 as confirmed by Trailer Valet, due to the fact that the original hubs on the pneumatic tires are not being compatible with the rubber tires.

If you're needing a replacement tire for your X5 swivel jack, you'll need to use the Replacement Tire for Trailer Valet Swivel Jack and Trailer Mover # TVTR.

expert reply by: Bryce D

0

Answer 1

I have a solution for you but there are no solid rubber tires for the Trailer Valet 5X item #STC-V211 There are solid rubber tires from Trailer Valet but those will only fit the XL versions. The rims are different and not interchangeable. We do offer…

view full answer...

Answer 2

We have solid rubber replacement tires for the Trailer Valet available. The Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR will fit Trailer Valet trailer dolly models XL, XL Pro, MV, TVXL25, TVXL2, and TVXLV2. This includes (1)…

view full answer...

Answer 3

There are 3 different battery chargers for the Trailer Valet remote controlled dollies and the correct one just depends on the weight rating of your dolly: 3,500 lbs - #TV77FR 5,500 lbs - #TV87FR 9,000 lbs - #TV27FR Once you know the weight rating of…

view full answer...

Answer 4

Yes, the Trailer Valet XL Trailer Dolly #TVXL25 does come with solid rubber tires. We carry the replacements here with part #TVXLSR if you ever need to replace one, but Trailer Valet did upgrade from the pneumatic tires for this superior design.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Frank, we do have replacement tires for the Trailer Valet jacks but it depends on what type of wheel you have currently. If you have a solid rubber tire the replacement you'd want is the part #TVXLSR, or if you have a setup that has an inner…

view full answer...

Answer 8

I may have a solution for you, but we don't carry any true pneumatic wheels for swiveling trailer jacks-they're typically only going to be used on heavy duty trailer jacks and dollies like the Trailer Valet #STC-V211. With that said, you may…

view full answer...

Answer 9

The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…

view full answer...

Answer 10

The Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs part #AKEBRK-35 may be the assemblies you need based off the weight capacity of 3,500 lbs. To be sure you want to make sure your existing assemblies are 10"…

view full answer...

Can You Replace The Pneumatic Tires On The Trailer Valet 5X Swivel Jack With Solid Rubber Tires?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching