Will the Trailer Valet RVR5 Remote-Controlled Trailer Dolly Work with a CruiseMaster Coupler

Question

Question:

Hey there, trying to find out if the trailer valet rvr5 is compatible with the cruise master hitch. Thank you

asked by: Andrew

0

Expert Reply:

The Trailer Valet RVR5 Remote-Controlled Trailer Dolly part # TVRVR5 is compatible with any trailer coupler which uses a 2" or 2-5/16" hitch ball. I looked up the CruiseMaster and this does not use a standard hitch ball design therefore would not be compatible. That said, there is a version of this dolly that may work better for you in the
Trailer Valet RVR3 Remote-Controlled Trailer Dolly part # TVRVR3 since it attaches to the frame so that's what I recommend.

expert reply by: Conner L

0

Answer 1

Since there isn't an adapter for the Lock N Roll articulating couplers you wouldn't be able to use the part #TVRVR9 but you could use the Trailer Valet RVR3 part #TVRVR3 instead which instead attaches to the frame of the trailer. This…

view full answer...

Answer 2

Hey Tom! Great question. The Parkit360 Force Electric Trailer Dolly #PA96VR (5,000 lbs) and #PA46VR (10,000 lbs) will work on an incline. However, if the grade is more than 6% you cannot use the dolly. As long as your driveway is no more than a 6%…

view full answer...

Answer 3

Hi Chris! The Parkit360 Force Electric Trailer Dolly - 10,000 lbs #PA46VR has a 2 prong plug (see attached image). I will admit to be surprised by that, but that is what they decided to go with. It isn't going to hurt anything though. What are…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Will the Trailer Valet RVR5 Remote-Controlled Trailer Dolly Work with a CruiseMaster Coupler

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching