Parts Needed to Flat Tow 2010 GMC Sierra 1500
Updated 01/15/2021 | Published 01/14/2021 >
Products Featured in This Question
Question:
What equipment do I need to be able to tow a 2010 GMC 1500, All Terrain, 4WD behind a Class A RV?
asked by: Ken
Expert Reply:
The first thing you'll need is a base plate kit for your 2010 GMC Sierra 1500 like with the part # 3154-3 which happens to be the easiest to use and install.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Hitch Pin Attachment
- Partially Hidden
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Brake System
- Shop: Base Plate for Tow Bar
- Shop: Vehicle Tow Bar Wiring
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Shop: Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
- Shop: Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights - Non-Binding - RV Mount - 8,000 lbs
- Shop: Roadmaster InvisiBrake Flat Tow Brake System - Preset
- Shop: Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Shop: Roadmaster Stop Light Switch Kit - GM Pickups/SUVs w/Adjustable Pedals
- Q&A: Base Plate Kit and Other Parts Needed to Flat Tow a 2010 Chevrolet Silverado 1500
- Q&A: Items Needed to Flat Tow 2013 GMC Sierra 1500 4x4 Behind Motorhome
- Q&A: Base Plates, Tow Bar, Wiring, Safety Cables, and Braking System to Flat Tow a 2010 Chevy Silverado
- Q&A: Recommended Parts for Flat Towing 2012 GMC Sierra 1500 4x4 Behind Motorhome
- Q&A: Parts Needed to Flat Tow a 2012 Chevy Silverado 1500 Behind a Motor Home
- Q&A: Parts Needed to Flat Tow a 2011 Chevy Silverado 1500 4x4 Behind an RV
- Q&A: Recommendation For Flat Towing 2007 Chevrolet Tahoe 4x4 Behind Motorhome
- Search Results: rm~88400
- Search Results: 6 pin round to 4 pin flat
- Shop: Roadmaster Nighthawk All-Terrain Tow Bar for Blue Ox Base Plate - Non-Binding - LEDs - RV Mount - 8K
- Search Results: rm8700
- Search Results: roadmaster 055~3
- Search Results: rm751000


