Solution for Popping MaxxFan RV Fan Lift Motor

Question

Question:

I have a Maxxair fan which is popping before shutting off which looks to be a common problem. The numbers on my fan are 4541K and the serial # is2015-01-4541K-A00048. I assume I need a new drive. Thanks

asked by: Rich B

0

Expert Reply:

Is the popping coming from the lift motor of the lid possibly or from the fan blade operation?

expert reply by: Jameson C

0

Rich B.

1/14/2021

I have a Maxxair fan which is popping before shutting off which looks to be a common problem. The numbers on my fan are 4541K and the serial # is2015-01-4541K-A00048. I assume I need a new drive. Thanks

Jameson C.

1/14/2021

We do have the lift motor you are needing as our part number # MA10-20270 which is the correct lift motor for your 4541K MaxxAir fan and would take care of the problem.

Answer 1

You reported that you cannot use the remote on your MaxxFan 4700K to put the vent cover up and down. Let's troubleshoot. Put some new batteries in your remote. Ensure that the display comes on. Verify if your vent cover now works. Verify if other…

view full answer...

Answer 2

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 3

I can help you solve this problem. Per the instructions, if your Blue Ox Patriot Portable Braking System - Proportional, part #BLU37TR, has a solid red light, there is too much pressure on the brake pedal. You need to pull the brake unit back, away…

view full answer...

Answer 4

We have checked with Blue Ox regarding the issue you are having with your Patriot III Braking System #BLU37TR in the past and our contacts there said to try powering off/unplugging the system and then waiting a bit before powering it back on. Then…

view full answer...

Answer 5

Hey, Mark! The MouseBlocker PROx part #MB94FR would be the best for your RV. It's the hardwire in options but this will be the best option because it will give you the availability to mount and put anywhere you can wire it into. Now these are…

view full answer...

Answer 6

Since it can manually be operated that would indicate that it's not the operator mechanism and is instead the lift motor that needs to be replaced. We offer this with the part #MA10-20270.

view full answer...

Answer 7

Hey Dale, yes, we can source the part you need. The replacement for the MaxxAir 10A21275N is the following: - Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan #MA10A21275K

view full answer...

Answer 8

Hello Mike, Valterra who is the owner of Mighty Cord is based in California, the Mighty Cord RV Power Cord Adapter Plug - 15 Amp Female to 30 Amp Male - Triangle #A10-3015AVP is made in China. Were you looking made here in the United States?

view full answer...

Answer 9

It sounds like you are looking for a replacement lift motor for a roof vent. There are several different options available depending on what make and model of vent you have. For example, a very common option is the Replacement Lift Motor for Maxx Fan…

view full answer...

Answer 10

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

Solution for Popping MaxxFan RV Fan Lift Motor

Product Page this Question was Asked From

Continue Researching