What Are the Dimensions of the Curt Weight Distribution Round Bars Where They Insert Into the Head
Updated 12/11/2020 | Published 12/09/2020 >
Question:
Bought a used trailer that came with a Curt hitch. One bar has been worn down at the bend. No markings on bar. Trailer is 27foot so the 800 to 1000 tongue weight is what I need. But I dont know what I have. Are there dimensions that would determine what I have?
asked by: Doug S
Helpful Expert Reply:
Assuming that you do have a Curt weight distribution system that has a tongue weight rating of between 800-lbs and 1,000-lbs you can use the Replacement Spring Bar for Curt Round Bar Weight Distribution System - 800-1,000 lbs TW # C17073. The round spring bar is 1-3/8" in diameter and has a notch on the upper part of the bar that inserts into the head that is 3/8" tall and starts 9/16" from the top of the bar. You can use these measurements to determine if these bars will match your old ones; I've also linked a rather rudimentary photo with dimensional drawings that you illustrates this.
These would be the correct bars for a trailer with a tongue weight in that range.
Product Page this Question was Asked From
Replacement Spring Bar for Curt MV Weight Distribution System - 1,000 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1000 lbs TW
- Round Bar
- MV
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: curt weight distribution hitch
- Search Results: shelf brackets e track
- Q&A: Diameter of Curt Round Bar Weight Distribution Spring Bars
- Q&A: How To Find Correct Round 1,000 Lb Spring Bars for Curt Weight Distribution System
- Shop: Replacement Spring Bar for Curt MV Weight Distribution System - 600 lbs TW
- Shop: Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Replacement Spring Bar for Curt MV Weight Distribution System - 1,000 lbs TW
- Shop: etrailer Enclosed Trailer Transition Plate - Universal - 1,000 lbs - Qty 1
- Shop: CargoSmart Folding Workbench Brackets for E Track or X Track - 26" to 40" Tall - 600 lbs
- Shop: CargoSmart Shelf Brackets for E Track or X Track Systems - 12" Deep - 1,000 lbs - Qty 2
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer jack
- Article: How to Measure for Trailer Hitch Drop
- Shop: Fifth Wheel Hitch



