Recommended Trailer Hitch for a 2020 Chevrolet Express Van Cutaway

Question

Question:

Hi, I have a 2020 Chevortlet Express 3500 cutaway cube van, and am needing a hitch receiver for it. Can you point me toward the correct one? Thanks!

asked by: Pete

0

Expert Reply:

The only trailer hitch option we have for a 2020 Chevrolet Express Van Cutaway is the Buyers Products 2" Hitch Receiver part # 3371801102 so this is what I recommend. It has a 2" receiver tube opening with class V capacity that should be more than enough.

expert reply by: Conner L

0

Answer 1

I would be happy to help you with dimensions to the Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis item #3371801102 you were looking at. The measurement you are asking about is 9-1/2". This is from the top of…

view full answer...

Answer 2

The Buyers Products #3371801102 Class-V hitch is a confirmed fit for your 2016 GMC Savana Van. It especially mentions cutaway chassis types. This hitch will definately fit on your frame. I have posted a picture of this hitch with a KUV shell added…

view full answer...

Answer 3

From where the mounting brackets on the Buyers Products 2" Hitch Receiver #3371801102 will meet up to the frame of your GMC van down to the top of the receiver opening measures 7" (see attached).

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Recommended Trailer Hitch for a 2020 Chevrolet Express Van Cutaway

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching