Availability of Adapter for Yakima HoldUp EVO 1-1/4" to fit 2" Hitch

Question

Question:

Hello I bought yakima rack hold up evo 1.25 , but i need the accesorie to hitch 2¨ , do you have or you know whats the model for this sku thanks

asked by: Ricardo O

0

Expert Reply:

In order to use the Yakima HoldUp EVO 2 Bike Rack for 1-1/4" Hitches # Y02480 with a 2" trailer hitch receiver you will actually need to swap out the current tongue with part # 8880826. The HoldUp doesn't have provisions for an adapter like some other bike racks do so this is the only safe way to get it to fit. If you were to use any other kind of adapter then that would void the warranty on your bike rack per Yakima.

expert reply by: Jon G

0

Answer 1

To convert your Yakima HoldUp 1-1/4" Bike Rack, part #Y02445, to be used with a 2" receiver, you absolutely can use the Replacement Spine for Yakima HoldUp Bike Rack for 2" Hitches, part #8890277. This spine is perfectly compatible…

view full answer...

Answer 2

For your Yakima HoldUp 2 Bike Rack for 1-1/4" Hitches - Platform Style - Tilting #Y02445, the Replacement 2" Hitch Adapter for Yakima Carriers #Y8890174 will not work according to my contact at Yakima and it is no longer available. Instead…

view full answer...

Answer 3

I definitely have some options so that you can use your Yakima Hold-Up EVO Bike rack #Y02480, but the reason Yakima does not recommend using an adapter with this bike rack is because most hitch adapters reduce the weight capacity of your hitch by…

view full answer...

Answer 4

Hello Jeff, I never like to be the bearer of bad news, but we do not have a replacement tongue for the Dr. Tray bike rack. The Replacement Tongue for Yakima HoldUp EVO Bike Racks #8880826 looks similar to yours, but will not work. The Dr. Tray bike…

view full answer...

Answer 5

Hi Aaron, Are you referring to just the speed knob #8880904 or the tilting mechanism? If you're needing the tilting mechanism then you'd have to replace the shank as well with part #8880824. If you're referring to something else and want…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Availability of Adapter for Yakima HoldUp EVO 1-1/4" to fit 2" Hitch

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching