bing tracking image
Q & A Icon

Is There a Backing Plate for the Erickson Mini E-Track Plate and What Size Bolts Should Be Used  

Updated 11/13/2020 | Published 11/11/2020

Question:

Do you have a compatible backplate for mounting this etrack on my enclosed trailer floor?....3/4” plywood. Also, recommended bolt/nut/washer set-up? If any drilling is required for the backplates you may carry.....i will use large washers under the trailer floor. I just received 4 from etrailer and will send pics after install.

0

Expert Reply:

It is not required to use a backing plate with the Erickson Mini E-Track Plate part # EM09134 but if you want to use one, that is perfectly fine you'd just need to make your own as we do not offer one for this. In regards to hardware, I'd suggest some grade 5 5/16" or 3/8" hex bolts 1-1/2" or 1-3/4" long should be fine depending on the thickness of the backing plate.

expert reply by:
0
Conner L

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>