Weight Distribution System for a 2010 Chevy Tahoe With 7100lb Travel Trailer.

Question

Question:

Hi I am looking for a Weight Distribution Hitch system for my Chevrolet Tahoe 2010 I will be pulling a Startcraft Travel Trailer with a GVWR of 7100LBS and a UVW of 6036LBS the trailer has electric brakes and the Tahoe has the towing package from the dealer I dont know how to check if it is HD towing package. Since this is my first RV I am trying to be sure and safe, I will really appreciate your help I have seen this C17062 but not sure it will be ok. Thanks

asked by: Virgil R

0

Expert Reply:

To make sure you get the correct weight distribution system for your needs you will need to make sure that you know your tongue weight, This includes the loaded trailer tongue weight and any added cargo weight behind the rear axle of your 2010 Chevrolet Tahoe.

The Curt MV Weight Distribution System w/ Friction Sway Control # C17062 is a great option as long as your total tongue weight is at least 800lbs, but I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-1000 as it works with tongue weights between 600lbs-1000lbs which gives you more room if you don't always carry the same weight in your trailer each time, and offers an improved sway control design over the Curt MV # C17062. The Fastway e2 # FA92-00-1000 also allows for you to back up your trailer with the system installed. You will also need a Hitch ball with a 1 1/4inch shank like Draw-Tite 2-5/16" Hitch Ball # 63840.

To measure your tongue weight, I recommend the etrailer Trailer Tongue Weight Scale # e99044 to give you an accurate tongue weight amount. The tongue weight of your vehicle should be 10-15% of your trailer's loaded weight. You will also need to include any added cargo weight behind the rear axle of your Tahoe for the total tongue weight. I included a video of the etrailer # e99044 for you to take a look at.

I attached the video review for the Fastway e2 # FA92-00-1000 for you to take a look at, and a few helpful articles that show how to measure tongue weight, and more information on weight distribution systems.

I recommend calling your local Chevrolet dealer and having them run your VIN, they will be able to tell you if your Tahoe came with the heavy duty tow package.

expert reply by: Samuel C

0

Answer 1

Chevy stopped using a port to plug in a brake controller after the 2006 model year. The tow package wires to install a brake controller are still present up under the dash, to the left of the steering column, held together with a white tag. The wires…

view full answer...

Answer 2

Hey Scott! For your 2012 Chevy Tahoe LTZ I recommend the SumoSprings Solo Custom Helper Springs #SSR-204-40. These have a quick and easy installation since they replace the factory bump stops. They will provide you with an additional 1,000 lbs of…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Considering the relative light weight of your trailer I would go with a suspension enhancement setup for your 2016 Chevy Suburban to reduce the sag. For that the air bag system par #F4108 will give you the flexibility in support to allow you to…

view full answer...

Answer 5

Hello Michael, thanks for reaching out. I really wish we did because that would be awesome, but I am sorry to say none of our electric trailer dollies can handle that much of a grade. The closest thing we have would be the Parkit360 Force Electric…

view full answer...

Answer 6

The Plug-In Wiring Harness #3064-P that you referenced is the correct brake controller harness for your 2019 Chevy Silverado 1500 and it is actually a brand new product for this generation of GM trucks (it currently only fits the 2019 model Silverado…

view full answer...

Answer 7

I took a look at the owner's manual for the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3064-P which plugs into your Prodigy P3 #90195 trailer brake controller and it says the harness for your 2019 Chevy Silverado 1500…

view full answer...

Answer 8

The factory brake controller port on your 2019 Chevy Silverado 1500 LD is in your vehicle's junction box underneath the dash, to the left of the steering column. The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part #3064-P is…

view full answer...

Answer 9

If your 2011 Toyota Tundra has a towing package but only a 4-flat you may not have a blue brake controller wire. The package with the factory installed 7-way trailer connector on the rear bumper included the plug under the dash, as shown in the photo…

view full answer...

Answer 10

No, they do not Nick. The Karrier ST205/75R14 Radial Trailer Tire with 14" Aluminum Wheel item #KE93JR you were looking at is received from the supplier already with the tire mounted on the wheel. The supplier does not balance the combination,…

view full answer...

Answer 11

The easiest way to disable the Continuous Damping Control Suspension (CDC) on your 2011 GMC Yukon XL Denali is to pull the " Electronic Stability Suspension Control, Automatic Level Control Exhaust" fuse which is located in the #2 position…

view full answer...

Weight Distribution System for a 2010 Chevy Tahoe With 7100lb Travel Trailer.

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching