Suspension Upgrade for 2012 Chevrolet Tahoe LTZ With Auto Leveling

Question

Question:

Hello. Im looking for some options for my 2012 tahoe ltz to strengthen up the rear end a little. It does have the self leveling non police package. what options do I have. Thank you in advance.

asked by: Scott

1

Helpful Expert Reply:

Hey Scott! For your 2012 Chevy Tahoe LTZ I recommend the SumoSprings Solo Custom Helper Springs # SSR-204-40. These have a quick and easy installation since they replace the factory bump stops. They will provide you with an additional 1,000 lbs of support to keep you level and help reduce body roll. Unlike the # F4186 these won't require maintenance so you can install and forget them. They also won't have a negative impact on your unloaded ride quality like some other options. If you need anything else feel free to reach out in the comments below.

expert reply by: Robin H

1

SumoSprings Solo Custom Helper Springs
(click to enlarge)

Robin H.

10/22/2025

Hey Scott, how did the SumoSprings work out on your Tahoe’s rear end? Did they give you the extra support and stability you were hoping for? Your update could make it easier for others looking to strengthen their suspension.

Scott

10/22/2025

@RobinH to be honest I have not had time to put them on. I got hurt back in May. Doing better Ill try to remember to reach out once I get them installed. Its looks pretty simple to change out.

Robin H.

10/23/2025

@Scott let us know once you get a chance to install them, hope you fully recover soon!

Answer 1

To make sure you get the correct weight distribution system for your needs you will need to make sure that you know your tongue weight, This includes the loaded trailer tongue weight and any added cargo weight behind the rear axle of your 2010…

view full answer...

Answer 2

Considering the relative light weight of your trailer I would go with a suspension enhancement setup for your 2016 Chevy Suburban to reduce the sag. For that the air bag system par #F4108 will give you the flexibility in support to allow you to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

A weight distribution system is really only designed to gain back half of the squat. For example, if the distance from the ground to the center or the rear wheel well is 40" while uncoupled for the trailer and 36" while coupled to the…

view full answer...

Answer 7

It can be difficult to remove the cover for the junction box on your 2016 Chevrolet Silverado 1500. I have linked one of our installation videos below which should help you with removing the cover. You can go to the 1:45 mark in the video which will…

view full answer...

Answer 8

Since you mentioned that your brakes are brand new it's very likely you have a set of self-adjusting brake assemblies that just haven't adjusted fully to the point of activating strongly. This is a very common problem actually and has a very…

view full answer...

Answer 9

We have suspension enhancement that will help beef up the rear suspension of your 2003 Chevy Tahoe but nothing will give you more towing capacity than you have so you'll want to make sure you don't exceed your towing capacity. These kits will…

view full answer...

Answer 10

For your 2018 Toyota Sienna the suspension enhancement kit I recommend is the Firestone Coil Rite part #F4155 because Firestone is known to have higher quality air bags than the competition. This kit installs by slipping into the coil of your Sienna.…

view full answer...

Answer 11

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 12

The wire bundle to install a brake controller on a 2008 Chevy Suburban is tucked up under the dash but may be more to the left of the steering column than on GM trucks. It is most likely tucked up above other components or wiring. There should be a…

view full answer...

Suspension Upgrade for 2012 Chevrolet Tahoe LTZ With Auto Leveling

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching