What Are the Dimensions of the Everchill RV Refrigerator w/ Freezer Drawer- 17 Cu Ft

Question

Question:

You only list the width. What is the height?

asked by: Mark W

0

Expert Reply:

The Everchill RV Refrigerator w/ Freezer Drawer - 17 Cu Ft # WAY44FR is 70-1/4" tall and 28-1/2" wide.

expert reply by: Erik B

0

click to enlarge

Jeff

5/2/2025

Is this accurate or the website? Website shows 69.5 tall.

Jameson C.

5/12/2025

@Jeff It's actually 70-1/4 inches tall.

Answer 1

The dimensions I found for your Dometic RM1350 on Dometic's site show it being 64.26" T x 33.69" W x 29.50" D. the closest match to these dimensions we carry is the Everchill RV Refrigerator w/ Freezer Drawer - 16 Cu Ft - 12V -…

view full answer...

Answer 2

While I was unable to confirm the exact dimensions of the Norcold 1200LRIM, I think your current refrigerator to be 63-1/4 inches tall, 32-11/16 inches wide, and 24 inches deep. Please confirm this. The Everchill RV refrigerator with freezer drawer…

view full answer...

Answer 3

The only trailer hitch receiver for your 2011 Chevy HHR is indeed a Class I, 1-1/4 inch hitch, but what you may be able to do is use a 1-1/4 inch to 2 inch adapter. I say "may" because the use of an adapter will reduce the tongue weight…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

What Are the Dimensions of the Everchill RV Refrigerator w/ Freezer Drawer- 17 Cu Ft

Continue Researching