Harness Needed To Install Tekonsha Prodigy P3 Brake Controller On 2020 Toyota Tundra

Question

Question:

I have a P-3 controller and want to know which 2plug adapter to use,i see some reviewers say 3040-p,and some say 3031-p,when I put my year vehicle it says no guarantee fit.Looking online-yahoo-tundra forums I see both,and amazon wont say fits my year,but the system is the same 2016 and up.I prefer ordering from you as ive had great success with all your products over alot of years,even the p3 came from you.Thanks for a reply and I would even use 3031-S as ive done automotive wiring for years and no issues splicing and soldering for best connections.

asked by: Bill N

0

Expert Reply:

In order to install the Tekonsha Prodigy P3 Trailer Brake Conttoller part # 90195 on a 2020 Toyota Tundra you will need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part # 3031-P. It looks like we've had a customer who used this on their 2020 Tundra and confirmed fit.

expert reply by: Conner L

0

Answer 1

Thanks for the additional information! For your 2021 Geo Pro 19FBS trailer, I recommend the Adjustable Width Trailer Hitch Receiver for RVs item #13703. This universal hitch fits trailer frames that are 22" to 72" wide so this will be…

view full answer...

Answer 2

Thanks for that info and we do have a replacement hub and drum for you with inner bearing #25580 and outer bearing #LM67048, though you are going to need to take one more measurement, and with Digital Caliper #301-17068 because it needs to be…

view full answer...

Answer 3

The Prodigy P3 part #90195 is basically the gold standard for brake controllers in terms of performance, reliability, and ease of use. This would be the best option for your 2018 Toyota Tundra to replace your integrated brake controller.

view full answer...

Answer 4

Hey Robert, For your 2020 Tacoma I recommend the etrailer hitch #e98905. This is a simple bolt on installation hitch and features a capacity of 6000lbs for towing. Plenty for the trailer you are wanting to pull. Along with the hitch you are also…

view full answer...

Answer 5

The problems you are having with the factory brake controller on your 2018 Toyota Tundra, as you mentioned, are not too uncommon. This is really the case with most factory brake controllers regardless of the truck make or model, as many customers…

view full answer...

Answer 6

Yes, you can install the Tekonsha Prodigy P3 Trailer Brake Controller part #90195 on your 2018 Toyota Tundra but you will need to hardwire it as there is not a plug-in adapter compatible with your vehicle at this time. The P3 is one of the most…

view full answer...

Answer 7

The Curt Echo Trailer Brake Controller #C51180 will work with your 2019 Toyota Tundra as long as your 7-Way vehicle wiring harness is properly installed and functioning. If your Tundra only has a 4-way flat trailer connection a Universal Installation…

view full answer...

Answer 8

According to my contact at TST, going with the internal sensor would have the following benefits: • Battery Life. The internal sensors can be expected to last 5+ years, versus about 1 to 1-1/2 years for the external. • Protection: By virtue of the…

view full answer...

Answer 9

The Tekonsha Prodigy P3, part #90195, is an excellent choice to upgrade the brake controller on your 2019 Toyota Tundra. Many factory brake controllers do not give the versatility and level of control that comes with the P3, which is why so many end…

view full answer...

Answer 10

Although the Prodigy P3 #90195 can be used for your 2018 Toyota Tundra you will need to use the adapter #3031-P instead of the current adapter #3040-P that you used for your 2014 Tundra. Please note that as of right now (February 2019) Tekonsha has…

view full answer...

Answer 11

For your 2018 Toyota Tundra, the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In #3031-P may plug into your Tundra but according to my tech contact it will not work based on their testing. Even though Curt carried their…

view full answer...

Answer 12

There isn't a custom install harness for the Prodigy P3 part #90195 for your 2022 Toyota Tundra so you would need to wire it to the current wiring that your OEM controller is wired too and unfortunately you'd need to make a trip to the dealer…

view full answer...

Harness Needed To Install Tekonsha Prodigy P3 Brake Controller On 2020 Toyota Tundra

Continue Researching