Function of Tekonsha Prodigy P3 Brake Controller on 2018 Toyota Tundra with Speed/Proximity Sensors

Question

Question:

I recently purchased this controller to replace the factory controller on a 2018 Toyota Tundra crew max. Is there any reason this will not work with the forward collision/adaptive cruise?

asked by: Josh I

0

Expert Reply:

The Tekonsha Prodigy P3 Trailer Brake Controller # 90195 will work fine with the forward collision/adaptive cruise on your 2018 Toyota Tundra Crew Max. The brake controller will not apply your trailer brakes unless the vehicle brakes are applied so the brake controller will not be impacted by those features.

expert reply by: Jason S

0

Answer 1

Thanks for that info and we do have a replacement hub and drum for you with inner bearing #25580 and outer bearing #LM67048, though you are going to need to take one more measurement, and with Digital Caliper #301-17068 because it needs to be…

view full answer...

Answer 2

According to my contact at TST, going with the internal sensor would have the following benefits: • Battery Life. The internal sensors can be expected to last 5+ years, versus about 1 to 1-1/2 years for the external. • Protection: By virtue of the…

view full answer...

Answer 3

The Prodigy P3 part #90195 is basically the gold standard for brake controllers in terms of performance, reliability, and ease of use. This would be the best option for your 2018 Toyota Tundra to replace your integrated brake controller.

view full answer...

Answer 4

In order to install the Tekonsha Prodigy P3 Trailer Brake Conttoller part #90195 on a 2020 Toyota Tundra you will need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part #3031-P. It looks like we've had a customer who used this…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Function of Tekonsha Prodigy P3 Brake Controller on 2018 Toyota Tundra with Speed/Proximity Sensors

Featured Help Information

Miscellaneous Media

Continue Researching