Do the Replacement Safety Straps for TruXedo Lo Pro and TruXedo Deuce Tonneau Cover Stretch?

Question

Question:

Is this material for the strap stretchy? I want to replace mine but it’s from another company but most specs seem the same. Mine are stretchy and that increases the length so I need to know before ordering.

asked by: Ryan O

0

Expert Reply:

The Replacement Safety Straps for TruXedo Lo Pro and TruXedo Deuce Soft Roll-up Tonneau Cover part # TX1118185 is designed with a little stretch just like the ones that come standard on most.

expert reply by: Randy B

0

Answer 1

There are two different replacement straps, though the length is similar. One is the 13 inch Replacement Safety Strap for TruXedo Lo Pro and TruXedo Deuce Soft Roll-up Tonneau Cover #TX1118185. The other is an inch shorter, the 12 inch Replacement…

view full answer...

Answer 2

On the underside of the cover you may find a tag or a number actually printed on the bottom of the cover. But if you know the model of the TruXedo cover then I can figure out which replacement cover you will need for your 2008 Ford F-150 with 5-1/2…

view full answer...

Answer 3

You can possibly find a tag with information for your TruXedo cover up under the cover towards the driver's side. If you don't find anything there then you can simply let me know what the year/make/model of your vehicle is as well as the…

view full answer...

Answer 4

I've attached the installation instructions for the TruXedo Lo Pro QT Soft Roll-Up Tonneau Cover, #TX579601, which has a very detailed diagram of how and where to install replacement parts. For your convenience, I made an enlarged copy of the…

view full answer...

Answer 5

I have a solution for you. I went ahead and reached out to my contact at TruXedo, and they confirmed that they do not have a video that shows the installation of the Replacement Safety Straps for TruXedo Lo Pro and TruXedo Deuce Soft Roll-up Tonneau…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Do the Replacement Safety Straps for TruXedo Lo Pro and TruXedo Deuce Tonneau Cover Stretch?

Product Page this Question was Asked From

Continue Researching