Troubleshooting Trailer Brake Controller Without Output Function
Published 08/20/2020
Question:
control box stopped working does not show any numbers when pressing the brakes or the override. replaced the box already with the harness vehicle is a 2005 f150 also checked the connector both ends are free of corrosion trailer brakes getting power and 12v constant is there ground is good checked all this with test light model is a Reese Towpower 74378 Pilot Brake Controller
asked by: Marco A
Expert Reply:
The issue may be in the way you are testing the brake controller. If you don't have a trailer connected when testing the Pilot 2-6 Brake Electronic Brake Controller - Time Delayed # 80550, you will need to connect an incandescent circuit tester like # PTW2993 to the 5 o'clock pin. This will give a power draw to the brake controller output telling the controller there is a trailer connected. An LED circuit tester will not have the draw on that circuit needed to register as a trailer connected to wake up the brake controller.
Because the pilot brake controller is a time-delayed unit and not a proportional unit, it should register the brake pedal even when testing with a circuit tester. A proportional brake controller would only register with the manual override and not the brake pedal because it would recognize the vehicle is not moving and that no brake output is required when pressing the brake pedal at a stop.
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Q&A: Parts Needed To Add A Brake Controller To A 2022 Jeep Wrangler Unlimited
- Q&A: Parts Needed To Install a 7-Way On a 2022 Jeep Wrangler With a 4-Way Flat
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Shop: Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Redarc Tow-Pro Liberty Brake Controller Installation - 2022 Jeep Wrangler Unlimited
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Video: How to Install the Roadmaster Stop Light Switch Kit on a 2022 Jeep Wrangler
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer wiring
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Article: How to Measure for Trailer Hitch Drop
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Search Results: brake controller
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Search Results: trailer jack
on Automotive Tools
